@Ivan_Mitov I was talking about 1.7.0 official stable version. 😂😂 They will release after 50 years i think 😂😂

  @ARGamingPK1 Great. 

  @David-TP hi, any new beta version to test? 4 months and not updates =(

David-TP wrote

This Article applied to

Deco M4_V2_1.5.8
Deco S4_V2_1.5.1

 

 

Download Link:

Deco M4_V2	Deco M4_V2_1.7.0 ( New version updated on 2024.3.7)
Deco S4_V2	Deco S4_V2_1.6.1_build_20240328 (updated on 2024.4.19)

Note!

1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.

2. For Deco M4_V2, the firmware downgrade(back to the official 1.5.8 version) needs to be implemented via firmware recovery.

3. For Deco S4_V2, it would revert to the official 1.5.1 directly via web UI.

4. How to update the firmware via web UI.

 

 

Firmware Modifications:

Deco M4_V2_1.7.0	Support for customizing Satellite Deco signal source. Support for customizing Client connection preferences. Support for Reboot Schedule. Support for NO-IP and DynDNS. Support for setting Effective Time and Bandwidth Limit for guest network. Added Smart DHCP switch under Access Point mode. Add Static Route. Add the ability to customize the MTU. Add IoT network.
Deco S4_V2_1.5.1	Support for customizing Satellite Deco signal source.

 

Please feel free to comment below if you have any issues with these two firmware versions!

 

 

Related Articles:

Connection Preference: Customize Your Preferred Signal Source

Understand the Differences Amo

To people on this firmware, is it stable enough to use or are there bugs?

  @ConcernedUser 

I disable ipv6, wifi principal only in 5ghz and ioT in 2.4 ghz.

Guest wifi disable.

QoS disable.

Roaming on

Beamforming on

With dual band note working good.

And no other problem.

  @SayeemAhmed  Use 1.6.2

When You try a beta version, have new features early but not stable.

  @ConcernedUser 

Definitely is. I had problems with main DECO when my ISO regularly rebooted my router - the DECO switched his own DHCP on causing mess on the network and going red till manual reboot. With 1.7 beta this is gone....

The firmware is running stable for several months now!

Thanks a bunch for the responses. Guess I'll go ahead and use the beta firmware. I don't understand why it's taken so long to just get a stable 1.7 update. It was supposed to be coming a long time ago/ Is it still planned @David-TP ?