Beta Software Deco M4/S4_V2 Support Connection Preference
This Article applied to
Deco M4_V2_1.5.8
Deco S4_V2_1.5.1
Download Link:
| Deco M4_V2 | Deco M4_V2_1.7.0 ( New version updated on 2024.3.7) |
| Deco S4_V2 | Deco S4_V2_1.6.1_build_20240328 (updated on 2024.4.19) |
1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
2. For Deco M4_V2, the firmware downgrade(back to the official 1.5.8 version) needs to be implemented via firmware recovery.
3. For Deco S4_V2, it would revert to the official 1.5.1 directly via web UI.
4. How to update the firmware via web UI.
Firmware Modifications:
| Deco M4_V2_1.7.0 |
|
| Deco S4_V2_1.5.1 |
|
Please feel free to comment below if you have any issues with these two firmware versions!
Related Articles:
Connection Preference: Customize Your Preferred Signal Source
Understand the Differences Among Deco Firmware Platforms
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, Can you help me check the hardware version on the product label, whether it is V2 or V3? I remember V3 has 1.6.2 firmware as well.
If it is V2, did you try to log into the individual web UI of this satellite M4 whose IP address could be found on the Deco APP, such as 192.168.71.250 here:
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@David-TP Logged into the unit from work by port forwarding port 80 on the Deco unit, but when I select the .bin file and hit upgrade I get a spinny wheel for a few seconds the "Operation Successful" but no firmware update is applied.
Will try again at home tonight - never had an issue before with updating firmware, but will double check the correct file etc. Just a bit annoying that the web ui doesn't provide more useful feedback about what's happened / not happend!
- Copy Link
- Report Inappropriate Content
@larkim A mi me ha funcionado correctamente.
Voy a probar a ver que tal, os voy diciendo.
Estamos en contacto.
- Copy Link
- Report Inappropriate Content
@Lalolelendo Yeah im also waiting for the update
- Copy Link
- Report Inappropriate Content
@David-TP At the moment I'm running the current beta firmware 1.7.0 on my M4 V2, and it's working well. No lost connections or red LEDs anymore as in the first beta version. To my surprise I must say, given previous experiences. :)
However, I was wondering if its possible to update to the final 1.7.0 version when it arrives, or do I have to install the 1.5.8 verion first through firmware recovery?
- Copy Link
- Report Inappropriate Content
@larkim Answering my own question - the solution was to log onto the IP address of the individual unit and upgrade from there. Should have thought of that sooner!!
- Copy Link
- Report Inappropriate Content
I have just recently purchased a twin pack of Deco M4 v2 units to expand my existing Deco mesh. They auto updated to the 1.6.1 firmware via the app. I want to update them to the 1.7.0 firmware, but when I connect to either of the units via the web browser, the 'Device Model' drop down doesn't work and without that it won't let me perform an upgrade. I've tried Chrome and Edge on a Windows 10 machine and Chrome on an Android device... all with the same result.
Is this a bug in the 1.6.1 firmware or am I doing something wrong? I don't recall having this issue when I installed beta firmware on my Deco X50 units.
- Copy Link
- Report Inappropriate Content
@PinguinM I was running a 1.5.0 beta firmware on my Deco X50's. When they finally released a new GA update, they released it as 1.5.5, so I suspect we will see similar with the Deco M4/S4 v2 update if it ever makes it to GA.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 40325
Replies: 232
Voters 3
