POE - Ideal switch for X50-POE

POE - Ideal switch for X50-POE

POE - Ideal switch for X50-POE
POE - Ideal switch for X50-POE
2024-05-03 15:27:19

I bought 2 X50-POE access points to extend my mesh network now composed by 2 X60.

I would like to try an Ethernet backhaul configuration, since I have an Ethernet type 6 wired connection to both new locations.

I was considering buying a TL-SG108PE, but I am not certain this is the ideal switch for this configuration:

Internet router (cable) - Switch - 

1) X50 #1 (POE)

2) X50 #2 (POE)

3) Empty (POE)

4) Empty (POE)

5) X60 (main) (the secondary X60 is WiFi only)

6) Wired PC

7) NAS (actually a AirPort Extreme with a USB HD)

8) Empty.

 

My main questions are:

1) Can I expect this to work, as I am assuming a mixed WiFi and Ethernet backhaul?

2) Will the POE power be enough for the 2 X50?

 

thanks in advance

 

  0      
  0      
#1
Options
2 Reply
Re:POE - Ideal switch for X50-POE
2024-05-06 02:57:02

  @amgraca 

Hi, The Power budget of TL-SG108PE would be enough for 2*Deco X50-POE.

You will also get a mixed WiFi and Ethernet backhaul.

Q2: How much power does Deco X50-PoE consume when powered by PoE?

US version: Up to 18W.

EU version: Up to 14.4W.

 

Best regards.

  0  
  0  
#2
Options
Re:POE - Ideal switch for X50-POE
2024-05-06 08:32:52

  @amgraca 

  1. Yes, you can expect this setup to work with a mixed WiFi and Ethernet backhaul configuration.

  2. The TL-SG108PE should provide enough PoE power for both X50 access points.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 119

Replies: 2

Related Articles