Official Release Deco S7 1.5.0 Supports Connection Preference, IOT Network, WPA3 and More
This Article Applied to
Deco S7_V1/V1.2
Current Release
| Deco S7_V1/V1.2 | 1.5.0 Build 20240329 | ***The 1.7.0 Platform |
Firmware Modifications
1. Support for customizing signal sources of Satellite Decos and mobile clients.
2. Support for Reboot Schedule.
3. Support for NO-IP and DynDNS.
4. Support for WPA3.
5. Support for setting Effective Time and Bandwidth Limits for the Guest Network.
6. Support Device Isolation.
7. Added Smart DHCP switch under Access Point mode.
8. Added connection type of V6 Plus.
9. Added the Static Route Function.
10. Added the ability to customize the MTU.
11. Added IOT Network Function.
Notes!
1. The firmware downgrade needs to be implemented via firmware recovery and it can't be rolled to 1.4.5 directly via web UI.
2. Please make sure the Deco APP is up-to-date.
3. Some features might not be available when there are other models in the Mesh network.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi David,
Have you got any link to get these firmware update before anyone else? Because Deco download center shows old version.
Thanks for your answers.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, Welcome to the community.
1.4.5 could update to 1.5.1 directly.
The last 1.5.0_build_20240329 has been canceled from the official websites. If you are on this version, it is also suggested to update to 1.5.1_build_20240711 in the recommended solution.
Bets regards.
- Copy Link
- Report Inappropriate Content
Hi David,
Your technicians still have not provided a fix for 1.5.0 or any feedback as to any progress with the situation, and to be fair it's been a while now.
So I tried again to downgrade to 1.4.5 to one single S7 via ethernet direct to the computer. All I got was an "uploading" box for ten minutes so I gave up. After that I downloaded 1.5.1 but a message in red flagged up that it was an invalid file, so I did not push the upgrade button?
My system consists of one X50-PoE as the main and three S7s as slaves.
If you or anyone out there has a guaranteed step by step solution to downgrade to 1.4.5 I would be very nuch obliged.
- Copy Link
- Report Inappropriate Content
I'm still facing connectivity issues with the released firmware 1.5.1 Build 20240711 Rel. 38529. Manual resetting the Deco S7 units are necessary to restablish the degraded performance.
Are you guys working on it? There are several complains similar to mine. I do not want to downgrade the firmware due tot he IoT Network feature.
I can help to grab debug data if you instruct me.
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the feedback.
Could you please refer to this link to help me check which case is more like yours?
Fix unstable connection when connected to the Deco network
You could try to save the system log from the web UI first in case it is needed later.
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
Like other users, I am experiencing connection issues with the last available beta firmware. I am being forced to daily restart my deco to reestablish the degraded performance. It has been a couple of months since the last beta version's launch, with many clients complaining and no movement from tp-link side.
It's very frustrating to receive this treatment from the company since I've been a tp-link customer for a long time.
I think it's time to consider other router brands...
- Copy Link
- Report Inappropriate Content
1.5.2 is available. I was on 1.5.0 but had no real issues, besides needing to turn off and on my main unit now and again.
I installed 1.5.2 yesterday, no issues to relay so far.
https://www.tp-link.com/uk/support/download/deco-s7/#Firmware
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 10743
Replies: 88
Voters 3
