New Arrival 5G AX1800 Wireless Dual-Band Gigabit Router--Archer NX200
We are excited to announce the release of the TP-Link first 5G router--Archer NX200, which takes advantage of your advanced 5G network with download speeds up to 4.67 Gbps.
Archer NX200 |
 |
 |
|
Hardware Interface |
1 × 10/100/1000 Mbps LAN/WAN Port 2 × 10/100/1000 Mbps LAN Ports 1 × Nano SIM Card Slot 2 × External SMA-F Antenna Interface |
WPS Button, Reset Button, Power On/Off Button, Wi-Fi On/Off Button |
|
LTE/5G Info
|
LTEFDD-LTE: B1/B3/B5/B7/B8/B20/B28/B32 (2100/1800/850/2600/900/800/700/1500 MHz) TDD-LTE: B38/B40/B41/B42/B43 (2600/2300/2500/3500/3700 MHz) DC-HSDPA/HSPA+/HSPA/UMTS: B1/B5/B8 (2100/850/900 MHz) |
5G NA and NSAN1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N77/N78 (2100/1800/850/2600/900/800/700/2600/2300/2500/3700/3500 MHz) |
|
Wi-Fi Details |
IEEE 802.11ax/ac/n/a 5 GHz up to 1201 Mbps IEEE 802.11ax/n/b/g 2.4 GHz up to 574 Mbps |
||
Management |
Web UI, Tether APP | ||
Guidance |
Getting StartedLED Status & Connecting to the Internet Plug & Play - Enjoy 5G network right after inserting a SIM card |
Software FeaturesManagement Emulator of Archer NX200
…… |
|
Fix a problem |
Hardware Related |
Network Connectivity |
|
Q&A
1. How to switch Archer NX200/NX600 to EWAN mode
Please log into the web interface of NX200/NX600 and go to Advanced -> Network ->Internet.
Make sure that the Default Gateway is Auto, and then check the WAN Priority as EWAN.
2. Does Archer NX200 support WPA3 encryption?
Besides 64/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK, both models also support WPA2-PSK[AES]+WPA3-Personal as security type.
3. What Network Mode can I choose when setting up Archer NX200/NX600?
It includes 5G/4G/3G, 5G only, 4G/3G, 4G only, and 3G.
4. Can Archer NX200 work as OpenVPN client?
No. They support IPSec VPN or working as PPTP VPN Server/OpenVPN Server. You may refer to this guide for configuration.
5. How to install LTE external antennas on Archer NX200/NX600
You may refer to this guide for installation.
Note: Tether app does not support to enable External Antenna.
Feel free to comment below if you want to know more about Archer NX200!
Related Article:
Archer NX600 - Enjoy 5G Speed and Share it with All Wi-Fi Devices
Archer NX200 AX1800 5G Wi-Fi Router- Good Offer for Major Mobile Service Providers
Deco X50-5G or Archer NX200
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Knight2k It does not work with Jio sim cards yet.
- Copy Link
- Report Inappropriate Content
@Marvin_S when it will be avilable in India ?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, thanks for your inquiry on our community.
Thank you for looking forward towards Archer AX200. Sorry that we really don't get advanced notice of whether there will be new products into your or other regions or when it might.
You may contact the local related team for further confirmation if your need is urgent.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Marvin_S Thanks for this post i just bought and testing archer nx200 vs tenda 5g and archer its better for me better signal i did also the movie unboxing and start on my youtube if someone wanted see unpacking and test welcome 
https://youtu.be/IWb2zgYVljI?si=PrxR-3lhzeF5R51K
- Copy Link
- Report Inappropriate Content
Please note, I’m currently using the beta version which includes fixes for the two issues mentioned earlier. However, I’m not sure if these fixes are included in the official firmware (v1.6.0 v3.0...). I tried upgrading to the latest available version some time back, but the same issues persisted, so I reverted to the beta version currently in use.
Kindly confirm if an official firmware for NX200 V1 with below beta fixes is available. If not, when we can expect, any tentative timeline as its already several months over. Thanks
https://community.tp-link.com/en/home/forum/topic/835710
https://community.tp-link.com/en/home/forum/topic/830486
Sathes
- Copy Link
- Report Inappropriate Content
1. Cannot log in TP-Link cloud in mobile interface
When you try to add password in mobile interface in 192.168.0.1 or what you use it just doesnt work, you cannot add ant charcters in the box.
2. You cannot lock in cells in 5g/4g
theres no option to lock in "one" cell, im having problems that the modem is jumping between two, another one has upload of 1.2mbps and another +40mbps what is really good where i live. I would love to lock in that and not jump inbetween to lose connection every 20minutes.
how about these what i asked about year ago?
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the update.
Have you updated to the latest Archer NX200(EU)_V1_1.7.0 Build 250904 firmware version?
1. Cannot log in TP-Link cloud in mobile interface
When you try to add a password in the mobile interface in 192.168.0.1 or what you use it just doesnt work, you cannot add ant charcters in the box.
- Did you also test the PC web UI? Can you properly input the password and log into the admin UI?
- If you're using Chrome, did it help if you switch from the phone view to "desktop site
(On the right of the address bar, tap More. Settings. Under “Advanced,” select Site settings. Desktop site.)
2. You cannot lock in cells in 5g/4g
theres no option to lock in "one" cell, im having problems that the modem is jumping between two, another one has upload of 1.2mbps and another +40mbps what is really good where i live. I would love to lock in that and not jump inbetween to lose connection every 20minutes.
- I'm afraid there hasn't been any news on whether or when the Cell Lock feature can be added.
- Have you tried manually selecting the 4G/5G bands to see whether it helps improve the mobile upload speed?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 23185
Replies: 29
Voters 1