Official Release Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
This Article Applied to:
Deco X50-5G_V1
Modifications and Bug Fixes:
Note: Certain features require the support of all Deco units in the Mesh network.
- Supported MTU configuration and Static Route.
- Supported IOT Network and Connection Preference.
- Supported VPN Server/Client and WireGuard VPN Protocol.
- Added WiFi Access Control / Allow List.
- Added ECO Mode and Wi-Fi Schedule.
- Added Firmware Auto Update.
- Added QOS on/off toggle.
- Supported Speed Limit.
- Supported TKIP Protocol and Introduced more Tapo/Kasa products under Smart Home.
- Added the detection of Ethernet connection speed.
- Supported setting a fixed WAN port.
- Supported Guest Network Portal and Portal Authentication in AP mode.
- Supported Hybrid Mesh and Internet Backup Mode.
- Supported DOH/DOT.
- Added Fing Device MAC Identification.
- Supported LED Schedule.
- Supported IPv6 onboarding.
- Optimized a series of network experience
Firmware Download Link:
| Deco X50-5G(US/EU/JP/TW)_V1 | 1.2.0_build_20241011_Official Version | Newly updated to Deco 1.12.0 Firmware Platform |
| Deco X50-5G(SG)_V1 | 1.2.0_build_20241011 |
Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. This firmware can not be degraded to the previous version.
Please feel free to comment below if you have any concerns about this firmware.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, Thank you very much for the feedback. Please refer to the reply here:
https://community.tp-link.com/en/home/forum/topic/716318?replyId=1442886
Deco X50-5G does have a web UI that could be used for manual firmware upgrades.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the feedback. I don't think it refers to any remote session.
It might be another TP-Link-manufactured smart devices
Apart from the Tapo P304M, I remember you also have one Tapo P110M. Would it be this plug?
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Both devices have been previously added and accounted for. I only have two - P110M and P304M.
The phantom device being added to my network is worrying because something is definitely not right. I am always monitoring my network and that's unusual.
- Copy Link
- Report Inappropriate Content
I am thinking of trying it out even if it is early access. Is it safe? Will I have any problems with my X50-5g warranty?
- Copy Link
- Report Inappropriate Content
@robertscott56 It's not in early access. It has been rolled out on stable release. It's on TP-Link's global website -> Deco X50-5G -> support page -> firmware
- Copy Link
- Report Inappropriate Content
@David-TP Hey I actually requested clarification from the engineer about my issues that I raised. Somehow the two issues I raised got mixed up now.
There are two distinct issues now I am facing:
1. Deco X50-5G repeatedly goes down throughout the day (with error messages in log saying temperature hitting high levels) which I raised some time back. Now the version 1.20 update brought the CPU and memory usage percentage, which now confirmed my suspicious that CPU usage kept going to 100% most of the time and memory usage over 80% most of the time too.
2. Second issue is about Tapo matter smart devices (T110M and T304M) which cannot stay connected if they are added to Apple Home via mattter.
These are two separate issues but please refer to the mail reply here which the engineer has mixed up two different issues into one. The first issue happened months before I bought the Tapo smart devices, so they are unrelated. And I don't seem to be the only one experiencing very high CPU and memory usage. There are other people here who are seeing it too.
Please help pass on the message.
- Copy Link
- Report Inappropriate Content
I have installed the beta/early access firmware provided in this thread.
Is this beta firmware file exactly the same as the one uploaded now on the official TpLink Page? https://www.tp-link.com/en/support/download/deco-x50-5g/v1/#Firmware
Or should we install now the official firmware from the TP Link page?
- Copy Link
- Report Inappropriate Content
Hi, yes, they are exactly the same firmware bin file. You don't need to install it again from the en site.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1019
Replies: 29
Voters 0
No one has voted for it yet.