This Article applied to:

Archer BE805 V1.0/V1.60

Updated on Dec 18, 2024:

The official version 1.1.2 has been gradually released. This latest version includes all previous modifications and improvements from the pre-release 1.1.0 version. It also includes additional bug fixes as follows:

1.Fixed the issue that the VPN client might lose internet when connected to NordVPN.
2.Enhanced MLO compatibility.
3.Optimized system stability.

Users can check for updates on the BE805's web interface or through the Tether App and install the latest version manually.

If you can't find version 1.1.2, please download the firmware from the direct link at the end of this article and upgrade manually.

Modifications and Improvements for 1.1.0 version

• Enhanced the compatibility with the NTT ISP.
• Newly added HomeShield function in V6plus dial-up.
• Newly added VPN Client and Server function in V6plus dial-up.
• Newly added IPOE dialing function and adjusted some dialing order.
• Newly added webpage management for the EasyMesh Satellite mode.
• Newly added the EasyMesh Topology map on the EasyMesh function page.
• Newly supported to work as EasyMesh controller in AP mode. 
• Newly supported 6GHz EasyMesh backhaul.
• Newly supported WiFi schedule for different wireless frequencies.
• Newly supported ECO mode to save power.
• Newly supported DoH & DoT function.
• Newly supported multiple selections in the Access Control Allow list function.
• Newly supported third-party VPN built-in function to simplify the configuration process.
• Newly supported Tap mode in OpenVPN server function.
• Newly updated the PPTP/L2TP/IPsec VPN server IP range to the same as the LAN IP range.
• Fixed the issue that tplinkwifi.net might fail to reach the router.
• Optimized the USB performance.
• Enhanced VPN performance.
• Enhanced system stability.

Note: Once upgrade to the 1.1.0/1.1.2 version, you cannot downgrade back to the 1.0.x firmware.

Firmware Download:

Before the Upgrade

(1) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.

(2) This official firmware for Archer BE805 V1.0/V1.60 can be applied to all versions (EU/US/JP/TW/etc.).

(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.

Direct Firmware Download Link

Additional Information

As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.

• Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.

Related Articles:

Wi-Fi Routers Support DoH and DoT Network

EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller