TP-Link Community > Tapo Smart Camera > About C225 camera cannot upgrade firmware from v1.0.7 to v1.0.11
< Tapo Smart Camera

About C225 camera cannot upgrade firmware from v1.0.7 to v1.0.11

About C225 camera cannot upgrade firmware from v1.0.7 to v1.0.11

About C225 camera cannot upgrade firmware from v1.0.7 to v1.0.11
About C225 camera cannot upgrade firmware from v1.0.7 to v1.0.11
a week ago - last edited a week ago
Tags: #Firmware
Model: Tapo C225  
Hardware Version: V2
Firmware Version: V1.0.7

Hello All,

 

I got a C225 camera which currently using v1.0.7. I found seem there is security issue and would like to upgrade firmware to v1.0.11 which is latest version.

However, Once I tapped upgrade firmware and completed, and it is able to click check upgrade and show the availiability of v1.0.11 again. 

Obviously that the firmware upgrade is fail. And I tried to restart the camera and switch off the power of camera then retry on upgrade, it still fails and version is still keeping in v1.0.7

 

May I know if there is any advice on this issue? As my camera is linked with my NAS and dont want to reset it as it may take time to reconfigure in NAS.

 

Thanks so much!

  0      
 
  0      
 
#1
Options
3 Reply
Re:About C225 camera cannot upgrade firmware from v1.0.7 to v1.0.11
a week ago

  @Tony1102 

Hi,
You can refer to the following instructions for a try.
    1. Check the connection status of the home router, and ensure the router has a stable internet connection.
    2. Move the smart device closer to the router.
    3. Reboot your router, and disable the firewall, antivirus, and ad-blocker settings on the home router.
    4. Reboot your camera again.
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#2
Options
Re:About C225 camera cannot upgrade firmware from v1.0.7 to v1.0.11
a week ago

  @Solla-topee 

hello, the cam is right front of the router.

Connection is very good even I remote from outside.

 

Also I have tried before as follow:

1. Unplug the camera

2. Reboot router

3. Wait around 20 mins 

4. Plug the camera again

 

still not able to complete the upgrade. To provide more specific on the reprod step, you can refer the following step:

 

1. Go to app > setting > firmware upgrade

2. Show v1.0.11 firmware

3. Tap upgrade button

4. Completed and show upgraded but check upgrade button still there

 

5. Tap check upgrade button

6. Observe v1.0.11 firmware is available to upgrade again

7. Go to device info and confirmed that camera is still v1.0.7 

 

i have no idea why stucking on the upgrade as i do nth when processing upgrade. Please advice. Thanks

  0  
  0  
#3
Options
Re:About C225 camera cannot upgrade firmware from v1.0.7 to v1.0.11
a week ago - last edited a week ago

  @Tony1102 

Hi,
1. Please send me(@Solla-topee) "Forum ID 720888 + camera's MAC address" via a private message.

2. If there is an SD card inserted into the camera, remove it temporarily.
3. Disconnect the RTSP/Onvif connection with the NAS for a try.
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 100

Replies: 3

Tags

Firmware
Related Articles
Tapo C225 camera cannot pair to Wifi 6 router
6942 4
C225 need new firmware
417 0
2 x C225 with Different firmware?
1244 0
C225 firmware downgrade / notification issues
1742 1
C225 EU/2.0 firmware downgrade request
197 0
C225 Firmware update
428 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.