Kamera verstellt eingestellt Bereich selbstständig

Kamera verstellt eingestellt Bereich selbstständig

Kamera verstellt eingestellt Bereich selbstständig
Kamera verstellt eingestellt Bereich selbstständig
2025-04-08 05:50:03
Model: Tapo C520WS  
Hardware Version: V2
Firmware Version: 10.5

Leider verstellt die Kamera sich von alleine. Damit verschiebt sich der Aufnahme Bereich und der eigentliche Überwachungsbereich

  0      
  0      
#1
Options
5 Reply
Re:Kamera verstellt eingestellt Bereich selbstständig
2025-04-08 11:17:41

  @Philip23384 

Hi, 
What area does the camera adjust on its own, such as the detection zone, privacy zone, or others? Please describe your problem phenomenon in detail.

 

Typically, the camera won't change its settings automatically. How do you confirm the camera adjusts the area on its own? 

 

Have you enabled Motion Tracking or Patrol Mode on your camera?

 

Best Regards

  0  
  0  
#2
Options
Re:Kamera verstellt eingestellt Bereich selbstständig
2025-04-17 21:00:17

  @Solla-topee 

Das gleiche habe ich auch. Kamera ist im Bewegungsverfolgung Modus. Und geht nicht in die Ausgangsposition zurück

  0  
  0  
#3
Options
Re:Kamera verstellt eingestellt Bereich selbstständig
2025-04-18 06:48:56

  @Hightower9 

Hi, 
Typically, the position where you enable the Motion Tracking feature is the original position, and the camera will return to this position if no new events are detected within 30 seconds after the tracking event.

 

If your camera does not return to its original position after tracking, could you please send me a video that shows the issue for analysis?
You can upload the video to your cloud server(such as Google Drive), generate a link to download it, and send me(@Solla-topee) the link via a private message.
 

Best Regards

  0  
  0  
#4
Options
Re:Kamera verstellt eingestellt Bereich selbstständig
2025-05-16 13:11:25

  @Solla-topee

 I have the same problem - with my C225. Firmware 1.0.12. It is set to reboot every 24 hours. Motion tracking is active - but the camera is wrong adjusted without any movement being detected. It is often the case that the camera was set correctly. Privacy mode is active. - It starts up overnight. If the privacy mode is deactivated, it is wrong adjusted. This rarely occurs - I have not yet recognized any reproducibility. The tilt is often correct - but sometimes it is adjusted to the initial position. 

 

  0  
  0  
#5
Options
Re:Kamera verstellt eingestellt Bereich selbstständig
2025-05-19 07:10:14

  @xsus 

Hi, 
You can check if the following instructions wil be helpful.
What Can I Do if My Pan & Tilt Camera Rotates Automatically?
Best Regards

  0  
  0  
#6
Options