@ScottF88 

I have exactly the same problem, tried everything over the last few months, only thing that seems to stop the issue is disabling auto tracking.  Not sure why this works but I have only had this issue since a firmware update earlier this year.

  @Mctav 

I have tried various settings to see if they would make a difference.  If be willing to try that as a test (although that would not make the product overly useful to me).

I thought I noticed a correlation between when it has a sudden activity requiring movement and recording that seemingly caused the connection to drop.  Possibly a firmware issue?  Seems like it doesn't attempt to reconnect after this.  Lately I've been finding that power cycling it causes it to reliably re-connect - indicating it's not a lack of ability to connect, but rather a failure to detect the connection is lost, or attempt to reconnect when it is found to be lost.

Any thoughts from the Tapo software engineers?

  @ScottF88 

I have spent the last 2 months investigating this issue, like yourself I changed all sorts of settings until I read a thread in here a while back that mentioned tracking, since I disabled that the camera has not dropped connection for the last month so I' am convinced this is the cause of the problem, it does however as you mention defeat the point of this particular camera to disable tracking.  The camera worked fine for a year until earlier this year presumably after a firmware update, I took would be interested what tapo engineers think?

  @Solla-topee 

The status of the led is flashing red until I power down the camera.

The camera is powered using the original adapter and cable.

The router is a virgin 3 hub, I have tried automatic channel optimization and it made no difference.

I don't have another router to try, the camera is working fine with the router I have except I have had to disable auto tracking.

See the last entry in this thread https://community.tp-link.com/en/smart-home/forum/topic/825620?replyId=1573284