Early Access Deco BE65/BE65 Pro_1.2.10 New Firmware with Enhanced Stability & Interference Resistance
Early Access Deco BE65/BE65 Pro_1.2.10 New Firmware with Enhanced Stability & Interference Resistance
This Article Applies to:
Deco BE65(US/AU/CA/EU)_V2.0/2.6
Deco BE63(US)_V2.6
Deco BE11000(US)_2.6
Deco BE65 Pro(US/AU/CA/EU))_V1.0/V1.6
Modifications and Enhancements:
- Boosted Mesh Roaming Performance
- Improved Network Performance in High-Interference Environments
- Increased MLO Network Stability
- Optimized IOT Connectivity
Firmware Download Link:
| Deco BE65/BE63/BE11000_V2.0/V2.6 | 1.2.10_build_20251212_Beta |
| Deco BE65 Pro_V1.0/V1.6 | 1.2.10_build_20251218_Beta |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected, WiFi Backhaul or Ethernet Backhaul.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
That is correct David; I noticed that the App was saying that the 2 '-MLO' profiles for my phone were showing as being offline, but on checking the phones network information it was stating that both the 5 & 6 GHz bands were being used for Transmit & Receive.
I then checked both MLO offline profiles on the App, and as you can see from the pictures they were both actually connected.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@David-TP Credit where credit is due. The early release firmware has fixed some of the issues that were present with public release and beta release 1.2.0 firmware, so thank you TP Link. I do think some refinement is still required still for devices connecting to the Deco's, sometimes some weird connection/band steering choices are made. I don't believe on this early release firmware my Deco's have crashed, which is very refreshing. Thank you.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, the 1.2.10 firmware for Deco BE65 Pro has been uploaded.
@MaKTaiL Hi, it should still be 5+6GHz under the MLO network.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP is it possible to add support for 2.4ghz MLO in the future? I have spots in my house where only 2.4ghz is possible and when I'm using MLO my connection drops out completely when I walk into these places which is quite annoying.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
DaveSisko wrote
Yes, the MLO network makes little sense for me without 2.4Ghz. In the garden or basement I don't have a network because 2.4Ghz is missing, so I have to set both networks to "Connect automatically". Then, of course, the network does not switch back to MLO when I come out of the basement, for example. In addition, my Pixel 8 Pro prefers to connect to the "normal" network anyway, so I always have to switch to MLO manually. I can turn off the MLO network completely without 2.4 Ghz.
Yes, that's exactly my struggle right now as well. MLO without 2.4ghz is pointless in my setup.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 949
Replies: 18
Voters 1
