Early Access Deco BE65/BE65 Pro_1.2.10 New Firmware with Enhanced Stability & Interference Resistance
This Article Applies to:
Deco BE65(US/AU/CA/EU)_V2.0/2.6
Deco BE63(US)_V2.6
Deco BE11000(US)_2.6
Deco BE65 Pro(US/AU/CA/EU))_V1.0/V1.6
Modifications and Enhancements:
- Boosted Mesh Roaming Performance
- Improved Network Performance in High-Interference Environments
- Increased MLO Network Stability
- Optimized IOT Connectivity
Firmware Download Link:
| Deco BE65/BE63/BE11000_V2.0/V2.6 | 1.2.10_build_20251212_Beta |
| Deco BE65 Pro_V1.0/V1.6 | 1.2.10_build_20251218_Beta |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected, WiFi Backhaul or Ethernet Backhaul.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@David-TP just to confirm: is 2.4ghz for MLO a possibility or can we put our hopes to rest? Also when is the official firmware expected to release? I'm kinda afraid to try out the beta on my brand new unit 😅
- Copy Link
- Report Inappropriate Content
MaKTaiL wrote
@David-TP just to confirm: is 2.4ghz for MLO a possibility or can we put our hopes to rest?
I have no idea either, since there hasn't been any updated news from the engineering team.
The official release of the 1.2.10 version might still take a while. I'll keep you updated once it is officially released.
Thank you very much for your understanding and support.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, according to my previous post for 1.2.0, I'm still stuck in 1.1.7 with custom fix for Qos bug. I see a new firmware again and still no one can tell me if and when your engineers are going to include the fix.
i'm sorry, but this is not the way to take care of customers. I spent hours to let engineers to remote connect to my router and solve a qos bug. And now I can't benefit of new firmware. Very disappointed in your way to consider users. Besides, activating MLO causes a mess in my network configuration and i would be interested in trying new firmware. Last, i'm forced to use qos (i have a fiber 2,5 gbit) because your router is not capable of solving bufferbloat (poor upload speed) while communicating with my ont and i was curious to try new fimware. i wrote a mail to assistance and via discord. No response.
i kindly ask you to tell me if you're going to solve this situation. if you are not able to solve, please let me Know so i'll sell the router. It's useless to have a router i can't firmware upgrade.
Thanks
- Copy Link
- Report Inappropriate Content
@David-TP is there a plan to get the BE65 V1 hardware firmware up to the same version as it seems to always get left behind. I have one v1 and one v2 (is the primary device) but never sure if having the versions mixed like I do if it causes problems with devices not connecting and a reboot of both solves it.
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the update.
There should be a similar firmware for Deco BE65_V1 later.
If possible, can you start a new post here to add some details about the network stability issue so that I can consult the senior engineer to see if there is any other workaround?
Thanks a lot.
Best regards.
- Copy Link
- Report Inappropriate Content
How is this firmware running for everyone compared to the official 1.2.0? Any tangible improvements?
- Copy Link
- Report Inappropriate Content
@MikeS3000 why not install it yourself and find out?
- Copy Link
- Report Inappropriate Content
@WelshPaul Good call. Installed this morning and no issues so far!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 2320
Replies: 28
Voters 1
