Deco XE75 Pro issues
Having different network issues after I added XE75 Pro as a main Deco to my X50 mesh in AP mode. IoT devices lose connection, Apple Home stops working for some devices while brand apps can control them and needs restart, 2.5 GbE connection is randomly downgraded to 100 Mbps and is restored after unplugging the cable for a moment. Deco app doesn't show signal level if I tap Signal on device details screen (which worked pretty well for X50 after 1.8 firmware update), shows many wifi devices as wired, IoT devices under main network or not at all and sometimes shows all network devices that are connected to main router. Even my Synology NAS has stopped working several times and only cutting the power helped which has never happened before.
Hi, thank you very much for the feedback.
Did the Deco units connect to each other all via WiFi Backhaul?
Can I have a screenshot of the network topology, such as:
The beta firmware has been sent via private message. Please let me know how it works.
Wait for your reply.
Best regards.
Hi,
I have ethernet backhaul ISP router -> 2.5 GbE Switch -> X75 Pro -> X50 -> X50. If I connected main Deco directly to ISP router, I got every lan device in my Deco app.
Link speed has not downgraded for a few days after I moved main Deco closer to switch and using another cable, so this may be solved. Yesterday most of the IoT devices were shown under main network and many wireless clients were shown as ethernet clients. After Deco reboot IoT devices were back under IoT network, but many devices were offline in the app, but actually had connection. Today they still were offline and after I blocked/unblocked each device (some I had to restart) they showed up online again.