Early Access Deco BE65/BE63/BE11000_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup
This Article Applies to:
Deco BE65(EU/US/AU/CA/UK)_V2.0
Deco BE63(US)_V2.6
Deco BE11000(US)_V2.6
Hey Everyone!
We are excited to announce a pre-release firmware update introducing DoH & DoT, Speed Limit, and Internet Backup, as well as other advanced features for Deco BE65/63/BE11000. We encourage users to install this firmware and share their feedback with us.
Firmware Modifications
New Features/Enhancements:
- Added WiFi Heatmap. (It also requires the Deco App version to be: 3.10.133 for IOS and 3.10.80 for Android.)
- Supported fixing a specific port as the WAN port.
- Added Hybrid Mesh feature.
- Added Internet Backup feature.
- Added DoH & DoT feature.
- Added Speed Limit feature for client devices.
- Optimized HomeShield feature.
- Improved System Stability.
Bug Fixes:
- Fixed the NAT Loopback issue.
- Fixed the issue where the Online List doesn't show IP addresses of connected clients when Deco is in AP mode.
- Resolved the issue where the Qos Total Bandwidth doesn't take effect as expected under certain circumstances.
- Addressed the issue where the Deco may restart automatically under certain circumstances.
Download Link:
Deco BE65/BE63/BE11000_V2.0/V2.6 |
1.3.0_build_2602261_rel_21001_Beta 2026.3.9 updated |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- This firmware can’t be degraded directly to the previous 1.2.10/1.2.0 version.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hang on...
- Addressed the issue where the Deco may restart automatically under certain circumstances.
This hasn't been addressed at all! I have been plagued with this issue ever since I got on the Beta train.
- Copy Link
- Report Inappropriate Content
Hi
I’m also interested in getting the 1.3.1 beta version for my Deco BE65/BE63/BE11000 V2 units.
I’m currently running firmware version 1.3.0 Build and I’m experiencing some random connection drops with a few IoT devices.
Could you please share the 1.3.1 beta version with me as well?
Also, if needed, is it still possible to downgrade from 1.3.0 Build back to the latest stable firmware without losing all my Deco settings?
Thanks in advance!
- Copy Link
- Report Inappropriate Content
As i don't work for tp-link i can't send you the requested beta but @Solla-topee will be able to send you the beta once their shift starts
Thanks
- Copy Link
- Report Inappropriate Content
Hello, I'm running firmware v1.3.0 and it's been quite soild apart from IoT devices disconnecting from the Deco's, it shows as online within the Deco app, however I'm not able to reach them, either inside my network, or external to my network.
I see other are reporting similar, and it's good to read this as loosing camera connections was driving me insane trying to figure out what was causing the issue.
I'm happy to test 1.3.1 if this is possible as I know it could be a VERY long time before TP Link officially release new firmware. Your product page still has v1.2.0 as the latest release. I feel for any users left on this version as 1.2.0 and 1.2.10 were both not good.
- Copy Link
- Report Inappropriate Content
Hi,
Happy to see DOH/DOT being supported through this beta firmware!
Up until now, the only issue I am seeing with 1.3.0 is (as reported by many) the fact that some of my (mainly IOT devices?) seem to no longer be connected while the Deco Mesh suggests otherwise... It would be nice to have that adressed in future (beta?) firmware releases.
Also: Seeing the fact that fiber connections (> 2.5 gbit) at home become more and more mainstream: any plans on releasing a recent (beta?) firmware on the BE65 Pro / BE68 products segment?
It is unfortunate to see products not receiving any firmware/feature updates more then a year after its release...
Thanks in advance!
- Copy Link
- Report Inappropriate Content
@ToneAU @Gino-S @FrederikDS @Shahinj @LittleY @Aiadi
Hi,
We have new firmware (v1.3.2) available for the following models. If you'd like to try it, please download it here and update it via web UI.
Deco BE65(EU/US/AU/CA/UK)_V2.0
Deco BE63(US)_V2.6
Deco BE11000(US)_V2.6
Note:
This firmware can't be degraded directly to the previous 1.2.10/1.2.0 version.
How to manually update the firmware via web UI.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Solla-topee
any changelog? and is this firmware applicable to BE65 SG region locked?
- Copy Link
- Report Inappropriate Content
Rolbird wrote
The website loads normally, but in the background, it connects to a malicious website that tries to install something on your computer.
I think your IT department should look into this.
Hi, thank you for the update.
The reported phenomenon is unrelated to the focus of this thread. It's recommended to start a new thread here with a detailed description of the phenomenon you encounter for further assistance.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi,
Compared to firmware 1.3.0_build_2602261_rel_21001_Beta, it(v1.3.2) does not add any new features but further improves stability.
@curiousbeaver78 This version does not applicable to BE65(SG) version. It's recommended to wait for the official firmware to be released for it.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 37838
Replies: 274
Voters 4
