Early Access Deco BE65/BE63/BE11000_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup
This Article Applies to:
Deco BE65(EU/US/AU/CA/UK)_V2.0
Deco BE63(US)_V2.6
Deco BE11000(US)_V2.6
Hey Everyone!
We are excited to announce a pre-release firmware update introducing DoH & DoT, Speed Limit, and Internet Backup, as well as other advanced features for Deco BE65/63/BE11000. We encourage users to install this firmware and share their feedback with us.
Firmware Modifications
New Features/Enhancements:
- Added WiFi Heatmap. (It also requires the Deco App version to be: 3.10.133 for IOS and 3.10.80 for Android.)
- Supported fixing a specific port as the WAN port.
- Added Hybrid Mesh feature.
- Added Internet Backup feature.
- Added DoH & DoT feature.
- Added Speed Limit feature for client devices.
- Optimized HomeShield feature.
- Improved System Stability.
Bug Fixes:
- Fixed the NAT Loopback issue.
- Fixed the issue where the Online List doesn't show IP addresses of connected clients when Deco is in AP mode.
- Resolved the issue where the Qos Total Bandwidth doesn't take effect as expected under certain circumstances.
- Addressed the issue where the Deco may restart automatically under certain circumstances.
Download Link:
Deco BE65/BE63/BE11000_V2.0/V2.6 |
1.3.0_build_2602261_rel_21001_Beta 2026.3.9 updated |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- This firmware can’t be degraded directly to the previous 1.2.10/1.2.0 version.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, thank you very much for the feedback.
The 1.3.0_build_2602261_rel_21001 beta firmware works for Deco BE63_V2.6 as well. Based on the current feedback, I think this firmware is worth a try.
By the way, can I have the model number of your 5G WiFi cameras?
For the slow picture loading issue, it is also recommended to refer to this link to change the IPV4 DNS to 8.8.8.8/8.8.4.4 to see whether it made any difference:
How to change DNS server settings on my Deco
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP hi! Here are the details about my cameras:
I have a Reolink Home Hub Pro that connects all my cameras on 5ghz
I also have a 12TB hard drive where all the videos are stored on the Home Hub Pro.
Here’s a breakdown of my cameras: -
1 TrackFlex Floodlight WiFi -
3 Reolink TrackMix WiFi -
2 Argus MagiCams -
2 Reolink Altas PT Ultra
Let me know if you need any more information!
thank you
sparky
- Copy Link
- Report Inappropriate Content
Hi, thanks for the update.
Deco BE63 with the latest firmware supports Channel Selection.
Have you tried to set 2.4GHz to channel 11, 5GHz to channel 48, and set "WiFi network mode" to "High Capacity mode":
New Features Arrived! Channel Selection and Wireless Network Mode
By the way, I see the Home Hub supports an Ethernet cable connection. Have you tried to connect the Hub to the nearest Deco via an Ethernet cable?
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP hi,
By the way, I noticed that the Home Hub supports an Ethernet cable connection. Have you tried connecting the Hub to the nearest Deco using an Ethernet cable?
Yes, I usually keep it connected that way, but when I connect some of the cameras to the WiFi from the Home Hub Pro, they act strangely.
So, I changed some cameras to the Deco WiFi, and they worked a bit better, but still had issues.
Previously, when I had the XE75 Pro, the Home Hub Pro worked really well, and the PTZ cameras were very responsive, which was great.
After that, I installed one BE63 with four XE75 Pros, and it was okay. However, tech support mentioned that I had too many Decos, so I removed all the XE75 Pros and installed a 3-pack of BE63s.
That's when my experience worsened because one main unit was on firmware version 1.3.1 while the others were at 1.2.10.
Currently, the 2.4GHz band is set to channel 11 was on 1, the channel width is set to 20MHz, the 5GHz band is on channel 48 with a channel width of 160MHz, and wireless performance is set to optimal. I have now switched it to High Capacity mode.
i went back to optimal mode some of the cameras on the home hub pro would not connect at all
thank you
sparky
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the update.
After setting the wireless channels and High Capacity mode, would they make any difference to the wireless connection to the 5G Reolink WiFi cameras?
I don't have any other suggestions for now. If you'd like to further troubleshoot with our senior engineer, it is recommended to send an email to support.forum@tp-link.com.
Subject:[Forum Escalation][ID 856030] Deco BE63 with Reolink 5G WiFi cameras. Please also include the following link in the email content:
https://community.tp-link.com/en/home/uc/info/4185788
Sorry for the inconvenience.
Best regards.
- Copy Link
- Report Inappropriate Content
I went back to optimal mode some of the cameras on the Home Hub Pro would not connect at all
after changing it, the cameras lost its connection, so I put it back
thank you
sparky
- Copy Link
- Report Inappropriate Content
Did you reboot all your points and router? Sometimes it then settles down into an ongoing improvement event.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 20185
Replies: 147
Voters 3
