Early Access Deco BE65/BE63/BE11000_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup
This Article Applies to:
Deco BE65(EU/US/AU/CA/UK)_V2.0
Deco BE63(US)_V2.6
Deco BE11000(US)_V2.6
Hey Everyone!
We are excited to announce a pre-release firmware update introducing DoH & DoT, Speed Limit, and Internet Backup, as well as other advanced features for Deco BE65/63/BE11000. We encourage users to install this firmware and share their feedback with us.
Firmware Modifications
New Features/Enhancements:
- Added WiFi Heatmap. (It also requires the Deco App version to be: 3.10.133 for IOS and 3.10.80 for Android.)
- Supported fixing a specific port as the WAN port.
- Added Hybrid Mesh feature.
- Added Internet Backup feature.
- Added DoH & DoT feature.
- Added Speed Limit feature for client devices.
- Optimized HomeShield feature.
- Improved System Stability.
Bug Fixes:
- Fixed the NAT Loopback issue.
- Fixed the issue where the Online List doesn't show IP addresses of connected clients when Deco is in AP mode.
- Resolved the issue where the Qos Total Bandwidth doesn't take effect as expected under certain circumstances.
- Addressed the issue where the Deco may restart automatically under certain circumstances.
Download Link:
Deco BE65/BE63/BE11000_V2.0/V2.6 |
1.3.0_build_2602261_rel_21001_Beta 2026.3.9 updated |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- This firmware can’t be degraded directly to the previous 1.2.10/1.2.0 version.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
You can send to me the 1.3.1 version? Thank you
I've got 3x V2 BE65's. They are running 1.3.0 Build 26022612 Rel. 21001 at the moment. Thanks,
- Copy Link
- Report Inappropriate Content
@Solla-topee any chance that a new stable firmware will be available anytime soon for BE65(US) V2 bought in singapore? if the latest beta is region locked, why the beta rel. 11551 wasn't region locked?
edit, nevermind, the TPLink support engineer sent me the 1.3.1 version, 1.3.1 does wonder compared to the 1.3.0 rel 11551
- Copy Link
- Report Inappropriate Content
@David-TP I've just installed this firmware on my BE65 here in Australia. I was attempting to resolve an issue that may have been related to the NAT loopback issue. However this was a very very bad idea, my units now all just boot to a red light and won't connect to the internet any more. I use TPG as an ISP in Australia via HFC cable. I'll have to look at some way of rolling back the firmware I guess. I understand this will involve a full reset of some variety. The devices are still accessible via http, they just don't connect to my ISP (or something), they all say the firmware installed is 1.3.0 Build 26022612 Rel. 21001.
- Copy Link
- Report Inappropriate Content
I am in Australia too and have 3 BE65 which are running fine on this beta. They however are all used as points. My main Deco connected my modem is a BE85, so maybe that's why I dont have issues. My connection is also HFC with Exetel.
- Copy Link
- Report Inappropriate Content
@BPCS I reset the devices back to a flashing blue light state to set up the network again, and it seemed to work, using pppoe and the TPG profile that is required in particular - it needs a particular value set to 2 during setup, to do with IP phones and stuff, it all looked good until the light went red again. There is something funny going on, it is quite believable that yours works and mine doesn't as the connection stage can be completely different between ISPs. I've decided to roll my firmware back.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@BPCS I did back out the firmware update on all 3 devices to 1.2.0 and all is working again. I've not had to do a firmware downgrade like that before! I just don't know what happened there, but I'm happy to have my network back.
- Copy Link
- Report Inappropriate Content
Can you send to me the 1.3.1 version?.... i will test it ... Thank you very much.
I've got 2x V2 BE65's. They are running 1.3.0 Build 26022612 Rel. 21001 at the moment.
- Copy Link
- Report Inappropriate Content
Hi,
Do you have any issues with firmware 1.3.0 Build 26022612 Rel. 21001 on your Deco BE65 V2? Why do you want to use firmware version 1.3.1?
Best Regards
- Copy Link
- Report Inappropriate Content
Greetings,
I sometimes experience interruptions or slow internet speeds on devices connected wirelessly, although not very frequently. I have a 1GB internet access speed. When I experience problems, I restart my two BE65V2 devices and the problem goes away, but it recurs after a while. My request is purely for testing purposes.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 30663
Replies: 202
Voters 4
