Early Access Firmware 1.4.0 for Deco XE75/XE5300/XE75 Pro_V2/V3 Added Wi-Fi Access Control, WireGuard VPN & More
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Update on Aug 18, 2026:
The official firmware version for Deco XE75/XE5300/WE10800/XE75 Pro/XE70 Pro_V2/V3 has been released publicly. Users can check for updates via the Deco's web interface or through the Deco App to install the latest version manually.
How to Update TP-Link Deco Firmware
If you cannot find the latest firmware version, please download the firmware from the link below and upgrade it manually:
| Deco XE75/XE5300/WE10800_V2/V3 | 1.5.0_Build_260603_rel.14401 |
| Deco XE75 Pro/XE70 Pro_V2/V3 | 1.5.0_Build_260603_rel.15804 |
We will manually lock this post to better focus on discussions regarding the new firmware. Please feel free to start a new thread here if you need assistance.
Best Regards
----------------------------------------------------
This Article Applies to:
Deco XE75(US/EU/AU/CA)_V2/V3
Deco XE5300(US)V2/V3
Deco WE10800(US)V2/V3
Deco XE75 Pro(US/EU/AU/CA)_V2/V3
Deco XE70 Pro(US)_V3
Vx.0=Vx.6(eg:V2.0=V2.6)
Firmware Modifications:
- Added WiFi Network Mode to enhance the overall performance of the 2.4GHz band.
- Added Camera Security.
- Added Whitelist/ Wi-Fi Access Control to support Allow List and Block List
- Supported Captive Portal for Guest Network.
- Supported Firmware Auto Update.
- Supported ECO Mode 1.0 to save power.
- Supported WireGuard VPN.
- Integrated third-party VPN services.
- Supported limiting client speeds.
- Supported fixing a specific port as the WAN port.
- Optimize client type recognition.
- Support managing new Kasa and Tapo product categories (including light strips, multi-port outlets, etc.).
Bug Fixes:
- Fixed the issue where Samsung devices could connect to the Deco WiFi but had near-zero network speeds.
Download Links
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- The Beta firmware versions can’t be degraded directly to the previous 1.3.1/1.2.9, etc. versions.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
