Beta Software Firmware 1.1.99 for Deco BE25 Adds Channel Selection, DoH/DoT & Fixed WAN Port!
This Article Applies to:
Deco BE25(US/EU/CA/HK/AU/NZ)_V1.0/V1.6
Hey everyone,
We’re pleased to invite members of our community to experience early access to beta firmware for the Deco BE25_V1.0
This firmware brings a multitude of significant enhancements, including Channel Selection, Fixed WAN port, Internet Backup, DoH&DoT, and more!
Firmware Features and Enhancements:
- Supported fixing a specific port as the WAN port.
- Advanced Parental Control subscription added APP block/App Time Limits feature
- Added Channel Selection feature.
- Added Hotspot Backup and Hybrid Mesh Backup features.
- Added DoH & DoT feature.
- Added Speed Limit feature for client devices.
- Optimized HomeShield feature.
- Optimized Onboarding experience.
- Improved the security and stability of the system.
Download Link
| Deco BE25(US/EU/CA/HK/AU/NZ)_V1.0/V1.6 | Deco BE25_1.1.99_build26031912_rel73941 |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- The Beta firmware versions can be degraded directly to the official 1.1.7 via web UI.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
Hello 
I'm going to test it on my three secondary BE25.
I have one BE85 as my primary and another as a secondary (unfortunately, there's still no new firmware for them)
Primary BE85 : SFP+ uplink
BE25 (all) : 2.5G Ethernet. Everything goes through a primary ONTi switch (ONT-S508CL-8S) connected to the 10G port of the primary BE85, and two secondary KeepLink switches (KP-9000-6XHML-X2) connected to the 10G port.
Seconday BE85 : SFP+
Hi, nice to see you again.
Is the topology like this:
I look forward to seeing how the 1.1.99 firmware works.
Best regards.
Note : I no longer have the problems I had before, but I disabled Deco automatic reboots
The 1.1.99 firmware for the BE25 doesn't offer me anything. I'm waiting for TP-Link to release a firmware update for the main BE85 with the same features... 