@David-TP will this work on a UK version of BE3600? I am just about to swap from a x55 because I need to be able to change channels manually  

David-TP wrote

This Article Applies to:

Deco BE25(US/EU/CA/HK/AU/NZ)_V1.0/V1.6

 

Hey everyone,
We’re pleased to invite members of our community to experience early access to beta firmware for the Deco BE25_V1.0

This firmware brings a multitude of significant enhancements, including Channel Selection, Fixed WAN port, Internet Backup, DoH&DoT, and more!

 

Firmware Features and Enhancements:

• Supported fixing a specific port as the WAN port.
• Advanced Parental Control subscription added APP block/App Time Limits feature
• Added Channel Selection feature.
• Added Hotspot Backup and Hybrid Mesh Backup features.
• Added DoH & DoT feature.
• Added Speed Limit feature for client devices.
• Optimized HomeShield feature.
• Optimized Onboarding experience.
• Improved the security and stability of the system. 
   

Download Link

Deco BE25(US/EU/CA/HK/AU/NZ)_V1.0/V1.6

Deco BE25_1.1.99_build26031912_rel73941

 Update Notice:

• Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
• Please make sure the Deco APP is up-to-date.
• The Beta firmware versions can be degraded directly to the official 1.1.7 via web UI.
• How to manually update the firmware via web UI.

 

As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.

• Provide a detailed network layout, including how the devices are connected.
• Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.

 

Thank you for your continued support and for being part of our community.

 

  @David-TP Hello,

I successfullt installed beta version but had to rollback to 1.1.7 due lack of support on home assistant.

After rollback I noticed that sometimes my connection drop for about 2-5 minutes. Debug log shows "wlanifMapToPhyMode: Invalid PHY mode from driver: 0", 7 times in around 3 minutes. Connection keept down around 3 minutes.

Tue Apr 14 14:03:31 2026 daemon.err nrd[2990]: wlanifMapToPhyMode: Invalid PHY mode from driver: 0
Tue Apr 14 14:03:31 2026 daemon.err nrd[2990]: wlanifConvertToSingleStreamMCSIndex: Invalid PHY mode from driver: 0
Tue Apr 14 14:03:31 2026 daemon.notice nrd[2990]: ar_apinfo_collect[line 1501]: AP sync timer expires!
Tue Apr 14 14:03:32 2026 daemon.err nrd[2990]: send ioctl failed
Tue Apr 14 14:03:33 2026 daemon.err nrd[2990]: send ioctl failed
Tue Apr 14 14:03:33 2026 daemon.info /usr/bin/apsd: path_selection_init_path_quota:1336: Info: path: eth0, util: 7, util_adjustment: 0, adjusted_util: 7, quota: 8300, rx_tx_factor: 0, rx_pkt_size: 0, rx_selected: 0, tx_rate: 0, rx_rate: 0, processed_rate: 2500

if you prefer, I can send full log to you.

Thank you, Igor.

  @David-TP 

Any news on the rollout of these features on the BE85 ? My BE25 are on version 1.1.99, but my main decoder is a BE85