Camera not returning to set point

Camera not returning to set point

Camera not returning to set point
Camera not returning to set point
2026-03-27 16:39:11 - last edited 2 weeks ago
Model: Tapo C560WS  
Hardware Version: V1
Firmware Version: 1.1.8

The camera does not return to the set location and has to be rebooted every so often to work again for a while 

thanks John

 

0
0
#1
1 Accepted Solution
Re:Camera not returning to set point-Solution
2026-03-30 09:31:11 - last edited 2 weeks ago

  @Marksie 

Hi, 
If your camera does not return to the correct position after tracking or tapping the preset viewpoints, the following instructions may help you: What to do if the Tapo Pan/Tilt camera can't return to its original position properly after tracking 
Best Regards

Recommended Solution
0
0
#2
1 Reply
Re:Camera not returning to set point-Solution
2026-03-30 09:31:11 - last edited 2 weeks ago

  @Marksie 

Hi, 
If your camera does not return to the correct position after tracking or tapping the preset viewpoints, the following instructions may help you: What to do if the Tapo Pan/Tilt camera can't return to its original position properly after tracking 
Best Regards

Recommended Solution
0
0
#2