Home Network CommunityWi-Fi Routers EasyMesh with BE550 and BE3600
Wi-Fi Routers

EasyMesh with BE550 and BE3600

EasyMesh with BE550 and BE3600

EasyMesh with BE550 and BE3600
EasyMesh with BE550 and BE3600
3 weeks ago - last edited 13 hours ago
Tags: #EasyMesh #Firmware Update #IoT Network #MLO Network
Model: Archer BE550   Archer BE3600  
Hardware Version: V2
Firmware Version: 1.2.5 Build 20260108 rel.68570(4555) / 1.3.1 Build 20251229 rel.52842(4555)

Hi all !

Just was wondering if you could help optimise (if possible) my setup.

 

I have a BE3600 acting as main router with MLO / MU-MIMO. I also have setup a separate IoT network.

BE550 is linked through ethernet via EasyMesh

 

However it doesn't pass the IoT or MLO to the BE550 (I upgrade to beta firmware).

 

The question is -> Is there anyway to pass them to the BE550 ?

Or if I make BE550 the main router will that push everything to the BE3600 ?

 

Or do I need to wait for a firmware upgrade on the BE3600 ?

 

Thanks !

0
0
#1
2 Accepted Solutions
Re:EasyMesh with BE550 and BE3600-Solution
3 weeks ago - last edited 13 hours ago

CiaranB wrote

So I made BE550 main but still no dice. Guess we need a new firmware for BE3600

  @CiaranB 

 

Hi,

 

Yes, you are right. For extension of the IoT and Guest networks via EasyMesh both routers need to support this new feature.

 

There has been no word from TP-Link which of the existing router models are going to get a firmware update that adds this feature.

Recommended Solution
2
2
#3
Re:EasyMesh with BE550 and BE3600-Solution
3 weeks ago - last edited 13 hours ago
Suppose for now, you could turn off Easymesh and put the BE3600 in AP mode with the same named SSIDs and passwords as the BE550
Recommended Solution
2
2
#4
6 Reply
Re:EasyMesh with BE550 and BE3600
3 weeks ago
So I made BE550 main but still no dice. Guess we need a new firmware for BE3600
0
0
#2
Re:EasyMesh with BE550 and BE3600-Solution
3 weeks ago - last edited 13 hours ago

CiaranB wrote

So I made BE550 main but still no dice. Guess we need a new firmware for BE3600

  @CiaranB 

 

Hi,

 

Yes, you are right. For extension of the IoT and Guest networks via EasyMesh both routers need to support this new feature.

 

There has been no word from TP-Link which of the existing router models are going to get a firmware update that adds this feature.

Recommended Solution
2
2
#3
Re:EasyMesh with BE550 and BE3600-Solution
3 weeks ago - last edited 13 hours ago
Suppose for now, you could turn off Easymesh and put the BE3600 in AP mode with the same named SSIDs and passwords as the BE550
Recommended Solution
2
2
#4
Re:EasyMesh with BE550 and BE3600
3 weeks ago
That's what I did. Roaming sucks though :D
0
0
#5
Re:EasyMesh with BE550 and BE3600
2 weeks ago
Does anybody know if Traffic Separation is in the works for BE230 V1 ? Thanks !
0
0
#6
Re:EasyMesh with BE550 and BE3600
13 hours ago

Hi @CiaranB ,

Thanks for contacting our community.

 

There has been no notification yet regarding whether the Traffic Separation feature will be added. We suggest you keep an eye out for future firmware updates or the latest pre-release firmware posts from the community.

△ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates!

Welcome to Our Community! Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click △ Or ☆Recommended Solution if the post/answer helps.
0
0
#7

Information

Helpful: 0

Views: 468

Replies: 6

Tags

EasyMesh Firmware Update IoT Network MLO Network
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.