Home Network CommunityDecoAfter a few minutes my connection drops from 500mbits to 90-100 MBits
Deco

After a few minutes my connection drops from 500mbits to 90-100 MBits

After a few minutes my connection drops from 500mbits to 90-100 MBits

After a few minutes my connection drops from 500mbits to 90-100 MBits
After a few minutes my connection drops from 500mbits to 90-100 MBits
Saturday
Tags: #Network Connectivity #Access Point Mode #PoE
Model: Deco X50 - PoE  
Hardware Version:
Firmware Version: 1.5.0 Build 20250619 Rel.69357

Hello everyone,

 

I have a problem with my three x50 POE access points. The access points only allow 100mbits to pass through. I have already checked everything. I checked my network cabling with a professional metre (Fluke DSX 602) and it is fine. I also replaced my POE switch. In everything I get the full bandwidth of 500mbits.

If I disconnect the decos from the switch and connect them again, I also get 500mbits for the first 5-10 minutes, but then the connection drops back to 100mbits.

I'm starting to get really annoyed. Everything I could read so far in the forum was not helpful.
 

 

0
0
#1
2 Reply
Re:After a few minutes my connection drops from 500mbits to 90-100 MBits
14 hours ago - last edited 14 hours ago

  @Fabi8292 

Hi,
The Deco X50-PoE has two 2.5 Gbps Ethernet ports. From your description, it sounds like the Deco has a high associated speed (>1000 Mbps) when plugged into the PoE switch, but after a few minutes, the associated speed drops to 100 Mbps, so the download speed drops to 100 Mbps.


Please try to disconnect a Deco X50-PoE from the PoE switch, connect the same Ethernet cable from the switch to a computer, test the associated speed and download speed on the PC every 10 minutes, for a total of 3 times, then confirm whether the associated speed and download speed on the PC are stable.

You can go to www.speedtest.net to test the download speed, and refer to the following instructions to find the associated speed on your PC: How to check the associated/link speed on a wired client

 

If the PC consistently achieves a 500 Mbps download speed, please provide the following information for analysis.
  1. Please describe your network diagram. Is it modem-- router-- PoE switch--3 * Deco X50-PoE?
  2. What's the model number of your PoE switch?

 

Best Regards

>> Check What's Currently Going on With Deco >> Deco Wi-Fi Heatmap ready for all Deco models
0
0
#2
Re:After a few minutes my connection drops from 500mbits to 90-100 MBits
14 hours ago

  @Fabi8292 

 

A brand new beta was just released for the Deco X50-PoE that you may be able to install/test. The beta is for the following Deco models/hardware versions.

 

Deco X50/X55/X3000 V3.0
Deco X55 Pro/X50 Pro V1.0
Deco X50-PoE/HB6300-PoE V2.0

 

This FAQ will go over how to find the hardware verson of your Deco X50-PoE please make sure your Deco is running hardware version 2.0 before trying this beta firmware 

 

You can find the link to the thread with the beta firmware below. 

 

Deco X50/X50Pro/X50-PoE Pre-Release Firmware 1.7.0 Introduces DoH/DoT, Channel Selection, and More!

 

 

 

 

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
0
0
#3

Information

Helpful: 0

Views: 66

Replies: 2

Tags

Network Connectivity Access Point Mode PoE
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.