Early Access [Topic Closed] Pre-Released Firmware Supports DoH and IoT Network for Archer C80 is Ready for Trial
The official firmware for a number of models has been rolling out to support DoH and IoT Network, please check for the updates on your router web GUI or via the Tether App to upgrade to the latest official version to try it out.
Check the below thread to get more details:
Wi-Fi Routers Support DoH and IoT Network
--------------------------------------------------------------------------
Good news!
We are happy to announce that there is new official firmware for Archer C80, which adds DoH, IoT Network, and a number of new features. We would like to share and provide early access to this specific version of firmware with the community. Don't hesitate to upgrade and install this pre-released firmware to try it out.
Direct Download link for pre-released firmware has been invalid.
Notes:
1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding!
2. You can still upgrade to the official firmware if there is any.
3. Some new features would not be available when the router works in Access Point mode.
4. This public beta firmware for Archer C80 can be applied to all versions (EU/US/JP/TW/etc.).
Releases Notes
Modifications and Improvements:
1. Added support for DoH.
You can go to Advanced > Network > Internet page to enable DoH. See the screenshot below.
There are 3 built-in DoH Servers: dns.quad9.net, dns.google, and cloudflare-dns.com, you can choose one at a time.
2. Added IoT network and IoT security.
- IoT Network: Advanced > Wireless > IoT Network.
- IoT Security: Advanced > Security > IoT Security.
3. Added support for Alexa
4. Added support for HTTPS access.
5. Optimized the guest network, and supports Access Time Control and Bandwidth Control. (Refer to FAQ 3299)
6. Optimized the EasyMesh, and supports upgrading multiple devices at the same time.
7. Optimized the UI.
Bug Fixes:
1. Fixed several bugs related to IPTV.
2. Fixed several UI bugs.
3. Fixed the bug that the pin doesn't work under certain scenarios.
4. Fixed a compatibility bug with certain intel network cards.
This latest version also includes some other enhancements and bug fixes. Take your time to explore all the great features or enhancements. Comment below if you have any feedback or run into any issues — we’re here to help.
Related Articles:
Wi-Fi Routers Support DoH and IoT Network
Other Articles that you may also be interested in:
EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Today i did test the WPS Off function.
That works on the Main C80 but the client / satellites ( also C80 v2.20 ) don't follow this feature.
Regards,
Thom
- Copy Link
- Report Inappropriate Content
@aceedburn @sajinala @Dinu_ks @Thom_NL
Hello all,
We've been provided an updated beta firmware to fix the reported client list issue, please install the new beta firmware on your C80 to check if it will display the client list correctly.
The beta download link has been updated in my previous reply:
https://community.tp-link.com/en/home/forum/topic/615066?replyId=1242704
Once you install this new beta, please make sure you relaunch the Tether App and scroll down to refresh the page.
- Copy Link
- Report Inappropriate Content
@Kevin_Z yes Noah sent it to me earlier after having a 4 hour remote session with me trying to solve this. I'm happy to say it does solve the problem but the clients only update when I pull down to refresh. Previously it updates automatically. And also my re450 appears as a double entry in tether although I only have 1 re450. But nevertheless it's a fast fix and kudos to Noah and all of you guys for the kind assistance.
- Copy Link
- Report Inappropriate Content
hi @Kevin_Z,
Again a other issue, i could update the main C80 router.
The Satellites couldn't update trough the Web UI or Tether App.
Those satellites don't support Local Update 
In the Web UI:
First Satellite shows;
Archer C80
1.13.1 Build 230705 Rel.67792n(4555)
Second sattelite shows;
Archer C80
1.13.1 Build 230822 Rel.61178n(4555)
Although i performed an update to the previous Betá version.
I just tested the Wi-Fi, on the main router, it was 1300 Mbps, on the sattelites 1170 Mbps.
One off the Wi-Fi bands dont link? ( Smart Connect ) 
For now i see most clients, with the speed the are using, although it seems that the speed shown is inaccurate. ( Possibly because the strange fw versions )
Regards,
Thom
- Copy Link
- Report Inappropriate Content
To update the satellite router you need to remove it from the easymesh network, connect to its wifi, perform a manual firmware update and then add it back into the easymesh network. Both routers should be running the same version of firmware.
I'm assuming when they release the official version the tether app/gui will update both together...
Kevin
- Copy Link
- Report Inappropriate Content
hi @klipse,
Eventhough this is a betá, updating the sattelite can be build without hassle 
Thanks,
Thom
- Copy Link
- Report Inappropriate Content
aceedburn wrote
@Kevin_Z yes Noah sent it to me earlier after having a 4 hour remote session with me trying to solve this. I'm happy to say it does solve the problem but the clients only update when I pull down to refresh. Previously it updates automatically. And also my re450 appears as a double entry in tether although I only have 1 re450. But nevertheless it's a fast fix and kudos to Noah and all of you guys for the kind assistance.
That's great. I'm happy to hear that the issue has been resolved with the new beta firmware.
Please don't worry, I believe Noah and the development team will work together to make sure to correct all of the issues with an official release.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
If there is any release note, I woul expect that it will explicitely mention version number, date an device models impacted. It is hard to figure out, if one have latest fw, as online fw update says I have latest, though the fw number and date seems same as before.
please include fw version and release date every time, even for beta releases..
- Copy Link
- Report Inappropriate Content
Thank you for your feedback.
We will update the date number when publishing new or beta firmware in the community.
For a specific firmware version, you can always check with the product firmware version on the official website, for example, the latest firmware for Archer AX73 v2 is Archer AX73(EU)_V2_1.0.8 Build 20230616.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 17994
Replies: 142
Voters 2
