Vpn client stuck on connecting on deco x50
I have a vpn server set up in a remote location with both openvpn and pptp options, I can connect to said vpn server using both protocols from a different router and from a device connected via the problematic Deco x50.
From the deco x50 itself I get the issue of vpn client showing as connecting on both pptp and openvpn. I changed the dns to 8.8.8.8 and 8.8.4.4 no improvement, same result.
As mentioned, the vpn server is accessible via a different router and via phone connected through the deco, the deco itself will not connect and I need it to connect so I can enable the vpn on specific clients that do not have the vpn client option, any ideas or tips?
My vpn server is Archer vr2100v if it makes any difference...
Thank you!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Update:
Please make sure the Deco firmware is up-to-date.
then refer to Troubleshooting VPN Issues on Deco for further troubleshooting.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Update:
Please make sure the Deco firmware is up-to-date.
then refer to Troubleshooting VPN Issues on Deco for further troubleshooting.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, Thank you for the email and the files have been received.
All configuration seems perfect. Have you also enabled the VPN server on the Deco X50? The default VPN subnet is also 10.8.0.0 so I wonder whether there might be any conflict.
If yes, it is suggested to disable the VPN server on the Deco first.
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Thank you for your reply. No the Deco x50 does not have VPN Server enabled on it, just the vpn client that I am trying to configure and gets stuck on connecting.
is there any way to see the logs of what is happening in background in the deco to see why it is stalling on connecting? or do you have any other ideas/tips?
Thank you!
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the update.
I don't have it now but I will forward your case via email to the senior engineer to see whether he had any further suggestions.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP any news on this? i have exactly the same issue on Deco X20 while I am trying to connect to a pivpn server
- Copy Link
- Report Inappropriate Content
@PumbaMunich anyone able to use this feature?
- Copy Link
- Report Inappropriate Content
Thank you very much for the feedback.
May I know which VPN server would Deco be set to connect to?
What is the VPN client status on the Deco APP, connected or connecting?
Have you tried the suggestions here:
https://community.tp-link.com/en/home/kb/detail/412688#2
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP I am trying to setup VPN Unlimited by KeepSolid.
I tried several servers but the status is just connecting. I already reached out to their customer service and they confirmed servers are up and running.
I already tried the steps provided on the website but still the same issue.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the update.
I will try to follow up on your case via email and ask the senior engineer for further advice.
Please check later whether you could receive my email.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 3719
Replies: 22