Archer AX10 keeps renewing its IP-address
hi there! I have a home network and all of my routers are in access-point mode, all of them but one is working great, but I've noticed my Archer Ax10 keeps on renewing its address even though it has its reserved IP in my ER605 - v2, any help would be awesome!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
This has been observed in some router models when they are working in AP mode.
Probably this will stop if you set a static IP address for AX10.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@terziyski yes and it also uses the address reserved to it, the status light also goes to red momentarily
- Copy Link
- Report Inappropriate Content
By renewing its IP address do you mean it receives a different IP address or just refresh its IP address to the same one, but it looses its internet access ?
- Copy Link
- Report Inappropriate Content
@terziyski It refreshes its address like every 30-60 seconds (logged from the er605) even though its IP is reserved and should not be expiring, it also sometimes looses internet sometimes it doesnt
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
This has been observed in some router models when they are working in AP mode.
Probably this will stop if you set a static IP address for AX10.
- Copy Link
- Report Inappropriate Content
@terziyski ill do this until tp-link issues a fix for this cause I've seen a different thread regarding this issue as well and it seems to be a feature if the router should open its own dhcp server or not and that some AX series routers does not respect the DHCP server it is connected to
regarding thread: https://community.tp-link.com/en/home/forum/topic/189956?sortDir=ASC&page=1
tnx for the help!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 735
Replies: 9
Voters 0
No one has voted for it yet.