Port forwarding only works for some ports

Port forwarding only works for some ports

Port forwarding only works for some ports
Port forwarding only works for some ports
a week ago
Model: Deco X50-5G  
Hardware Version:
Firmware Version: 1.1.7

I replaced my router with this one.

I have a telekom sim card, and changed to the apn that gives you a public IP address, like before.

I have a teamspeak3-server running in my local network that I used to expose, and I tried port forwarding.

The port 30033 is open, I checked so successfully. However port 9987 isn't open. I tired declaring both in the same forward and seperate, both didn't work.
Whatever I do only 30033 is open.

I am out of ideas at this point.


I hope someone can help me,

 

best regards

 

EHerb

  0      
  0      
#1
Options
1 Reply
Re:Port forwarding only works for some ports
a week ago

  @EHerb 

Hi, welcome to the community.

Have you had a similar issue with the old router?

If I googled "teamspeak3-server port 9987 is always off", I could see many old feedback about port 9987:

https://community.teamspeak.com/t/failed-to-bind-port-9987/33863

https://forum.turris.cz/t/issue-with-port-forwarding/3132

https://community.ui.com/questions/TeamSpeak-3-server-VS-USG-port-forwarding-works-but-port-scanner-says-port-timeout/5d24f69b-f081-4625-9666-ed00fa9c8342

 

 

Here are some useful suggestions:

1. Check that you don’t have an instance already started or a software that is taking port 9987.

2. Try to delete the server and reinstall the package again.

3. Please also test whether you can still connect the TeamSpeak 3 server when port 9987 is closed.

 

Thank you very much and best regards.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 63

Replies: 1

Related Articles