Forums/
Requests & Suggestions
2021-05-27 08:20:01
@paderijk Sounds good with this advice
2HELPFULS
Forums/
Routers
2021-05-27 07:05:05
@elderf The NAT throughput is 95Mbps for this router, it is advised to use iperf to check the NAT Throughput. This instruction tell us the different of speed test and the iprerf test....
0HELPFULS
Forums/
Controllers
2021-05-27 06:31:06
@bdl Hi there, are you using the Controller mode to manage these two switches, or use the Standalone mode? In the Standalone mode, we can change the system priority and the modes of port(active or...
1HELPFULS
Forums/
Controllers
2021-05-27 03:22:41
@MarkDC7 Hi there, if you only have this switch, it cannot be managed on the APP. Cause the APP needs to bind a hardware controller OC200, then log in the OC200's page on the APP to manage the other...
0HELPFULS
Forums/
Pharos Wireless Bridges
2021-05-27 03:10:47
@Ninja365 Hi there, is your current network working as CPE1)))((CPE2--EAP? After that what you want to do is as follow: CPE1))((CPE2--EAP))((CPE 3? It has no issue if you want to set up like that. By...
0HELPFULS