Using the Omada app (v3.24.36) for iOS, I could not configure a VLAN ID for a newly created SSID. It was necessary to later connect with a PC to the EAP610 and configure the VLAN ID. Please consider...

@BrianQ81 What I would recommend is to configure the SG1016PE with the same settings as the SG108PE that it is replacing. That is, use the same exact settings that you have in the working SG108PE in...

@BrianQ81 If the PC running the Easy Smart configuration utility is on the same subnet as the switch, there should be no problem. The way you now have the SG1016PE configured, only the default VLAN...

@BrianQ81 In looking over your latest configuration, I see several errors: 1. Port 16 of the SG1016PE needs to have the default VLAN as an untagged member. 2. Port 8 of the SG108PE needs to have the...

Our posts were made at the same time. Please give me a moment to look at your latest configuration.

@BrianQ81 Yes, there is a misunderstanding. From your initial post and your configuration snapshots, I constructed the following diagram: Today’s configuration snapshots of the SG1016PE are...