@doublemac For the switch ACLs to work properly, at a minimum you need to have a switch interface enabled on each VLAN, otherwise everything passes through the switch and on to the gateway for...

@lukass2000 In comparing the two models here, the SG2428P has 2 fans and the SG2428LP is fanless. The SG2428P power supply must be larger as it can supply 250W PoE while the SG2428LP is only designed...

@lukass2000 You might take a look at this thread that was posted some time ago.

@randoman If the switch is being managed by a controller on the management VLAN, there is no need to enable a switch interface on any other VLAN unless you are routing or providing DHCP services with...

@jendakol When we get an answer from the moderators, I expect to hear that the EAP's port switching is an "all or nothing" function when it comes to VLAN tagging as opposed to the capabilities of an...

@jendakol A similar question to your first core question was asked in another forum some three months ago. After reading it and out of curiosity, I decided to do a quick test as I do not use the...