Hi @GlenO Thanks for posting here. Reset the EAP: with the EAP powered on, use a pin to press and hold the reset hole for about 8 seconds until the LED flashes green-red-yellow to factory default...

Hi @Javito Is the issue primarily with Tapo? If so, you may want to check out the following post and reference the configuration provided there. Troubleshooting Guide for Unstable IoT Device...

Hi @Sergey_Br Thanks for posting here. As a single-band 2.4GHz access point, the EAP 110 may face the following challenges when handling continuous data writes from cameras at night: - Channel...

Hi @Campagnolo Thanks for posting here. Please refer to the following guide to do some troubleshooting: What Should I Do If My Wireless Clients Have Roaming Issues? If the situation persist, please...

Hi @Esully565 Thanks for the reply. When your laptop and the CR1000 are on the same subnet, they can communicate normally. However, when you set your computer's IP to a different subnet, the CR1000...

Hi @Dave_ Thank you for your response. The troubleshooting steps already performed should have resolved the issue - there might be some other underlying factors at play. I see the support team has...