@melospawn you can not do that on ER605 you local network is LAN 192.168.0.0./24 if you want to do xlate you have to do this on ASA The ER605 only understands the real LAN address.

@melospawn Omada configuration

@melospawn If the tunnel is up, it is either NAT on the Cisco ASA or ACL on the Cisco ASA, it is difficult to give any advice as I do not have the whole picture. on the ER605 it's pretty easy, it's...

@melospawn the tunnel routes what you have set as the remote subnet on the ER605, you should not create a router manually. I have many Cisco ASAs that have VPN against different TP-Link routers and...

it seems that my problem has been solved, I have now run against my own Openvpn server from pivpn for a few weeks without problems with UDP, the speed is good, probably only limited by the server...

@SomeNetEngineer good, then you have what you need for your initial question, now you can activate policy route and route all traffic out on the remote WAN.. there will be policy route to both...