@Wingcc Hi, Reset the Archer AX53 to factory default settings by pressing and holding the small "Reset" button on its rear side for about 5 seconds. Then wait 2-3 minutes to allow the AX53 to boot up...

@NobbyH Indeed, extending a wireless network wirelessly is quite inefficient. (that's a limitation of the technology itself) And the RE220 is one of the lowest-priced dual-band extenders on offer....

@NobbyH Hi, If you want the wireless networks of the RE220 to have the same name(s) as the wireless networks of the InkSys wireless router, then log into the RE220 (either via the webGUI or the...

@Zhivago-1_2 Hi, Have you followed Internode's instructions to configure the Internet connection? www<dot>internode.on<dot>net/support/guides/general_settings (need to replace <dot> with . ) One...

@Incandescent1 Hi, Do all three TL-PA9020P only get you 90 Mbps? In this case you might want to try to relocate the TL-PA9020P that connects to the router to another wall socket that is farther away...

@Phil_at_home Hi, Verify that you contract was indeed switched to customer-owned router. (perhaps check whether this information shows somewhere in your customer account) If you have a computer with...