Title: Request: Show wired clients behind EAP211 Bridge in Omada Topology Message: I am using the EAP211 Bridge Kit with Omada. The bridge works well, but Omada Topology does not show wired clients co

The ER7212PC V1.0 built-in controller is still stuck at 5.14 while Omada 6 has now been rolled out. I understand that it will require extra effort to upgrade the controller due to the RAM constraints.

Omada Cloud Controller – EAP Onboarding Quirk While onboarding a TP-Link EAP via the Omada Cloud-Based Controller, I encountered a confusing dual-state behavior. Here's the full sequence: Initial Conn

This Article Applies to OC200(UN)_V1_1.37.9_pre-release (Built-in Omada SDN Controller 6.0.0) OC200(UN)_V2_2.22.9_pre-release (Built-in Omada SDN Controller 6.0.0) OC220(UN)_V1_1.2.9_pre-release (Buil

I marked a thread that I created as "Recommended Solution" after I found a work around. But the workaround does not solve the underlying issue though, the work-around is a just a crutch.Therefore I al

While I'm waiting for my 2.5G and 10G SFP+ transceivers and other 2.5/5/10G gear, I decided to start using the SX3008F with my existing SFP transceivers to get going. The SFP transceivers used are TP-