Himanshu_INLV1Online
Following: 0Followers: 0
Forums/ Deco
By ddebasilio 2020-06-10 14:21:34

M4 + E4 Wi-Fi mesh only getting 100mbps

Hello, I am only getting ~90 Mbps on my devices but I have a gigabit connection at home. This is my current setup: 1 x Deco M4 (AC1200) (connected to my wi-fi router, the original wifi is disabled) 3
Forums/ Deco
By Himanshu_IN 2020-03-24 16:33:50

Slow speed on slave node

Hi I have noticed that I am getting variable wifi speeds on my slave node. Usually the speeds are 40-50% slower. The speeds on the master node are close to 100Mbps at all times. Is this a known limita
Forums/ Deco
By Himanshu_IN 2020-03-22 18:46:42

Deco E4 different SSIDs

Hi I have recently set up set of 2 Deco E4 at my home. I realised that by default, only 1 network ID is created. Is it possible to have 2 seperate network IDs ( 1 each for 2.4 & 5 Gz frequency). If ye
Forums/ Deco
By Himanshu_IN 2020-03-19 06:37:12

Combination mesh network using E4 & M4/M5

Hi I have recently purchased E4 (set of 2) for my home use. I later realised that E4 will limit my WiFi speed to 100 Mbps. Given I have a 300 Mbps broadband & a need for a 3rd node, I have 2 options 1
Forums/ Deco
By KlausDetlef 2020-01-16 16:23:58

How do I get Wifi over 100 Mbps on Deco E4?

Hi. I have a Deco E4 and have a 300 Mbps broadband connection, but is only able to get less than 100 Mbps Wifi connection (up- and download) with my E4. I can see that the E4 can deliver up 300 Mbps a
Forums/ Deco
By Himanshu_IN 2020-03-17 14:13:53

Query on Deco E4

Hi I have a 100 Mbps connection at my home on the 1st floor of a building. I have a home office in the basement of the same building. I wish to share the home internet with my home office. If I put a