Implemented [FEATURE REQUEST] TAPO Cameras ADD STATIC IP
good day tp-link I would like to atleast have a static ip option for the tapo cameras, its especially important when you have a central dvr and most cctv ipcams have static ip option. I know that we should set a static IP on the router but it does not always work, the tapo camera goes for its dhcp first then after turning it off and on again it gets its static ip assignment. if we have a blackout and the power goes on back again the tapo camera will boot first before the router which would mess up the ip again. I hope STATIC IP feature is added. thanks
Consumers I need your help to upvote static IP to infinity
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The fact that this is not an option is mind boggling. Please remedy this on the C210 as well as these cameras are essentially useless for anyone who wants to use them outside of the terrible mobille app.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
+1 for fixed IP address please !
- Copy Link
- Report Inappropriate Content
Such a shame that we can't assign a fixed IP. We need 2000 cameras and we are going with cheaper Chinese cameras as tp link can't figure out a simple issue and fix things. The developers watching this thread are responsible for the loss in sales
- Copy Link
- Report Inappropriate Content
Will TPLink ever listen to us?
- Copy Link
- Report Inappropriate Content
Hello everyone,
Thank you for your valuable feedback and feature requests here. While I don't have specific details about when the feature to be able to configure static IP address will be available for Tapo cameras, I'll keep logging the feature requests and pass them along to the relevant team to evaluate.
In the meantime, if you are looking for an alternative solution to assign a static IP address to your camera, you can try configuring the address reservation feature on your router.
Here we take the TP-Link router as an example, you can refer to the link below to set up the address reservation feature on the TP-Link router.
How to configure the Address Reservation on Wi-Fi Routers?
We value the user's experience and feedback. If you have tried the address reservation feature and find it ineffective for your specific use case, please feel free to share your experience. We are continuously paying attention to the user's feedback and will pass it on to the relevant department for evaluation and improvement of our products.
Best regards
- Copy Link
- Report Inappropriate Content
it was the first thing i tried, but my router (Orange cable modem) fails when i want to assign/reserve a specific IP to a specific device (mac adress).
So no option for me. :/
J
- Copy Link
- Report Inappropriate Content
@Solla-topee We have already done mac-reservation and mac-binding. It works to "some" but mostly or most of my c210 and c310 tapo cameras just occupies random ip addresses. We are really waiting for the day this basic feature is added. Please add this feature in the TAPO APP and VIGI APP for ios and andriod please.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 58
Views: 22093
Replies: 100
Voters 53
