Home

Forums

Stories

Knowledge Base

Smart Home Community > Tapo Smart Camera > Tapo C200 failure live view: 406 Not acceptable

< Tapo Smart Camera

Tapo C200 failure live view: 406 Not acceptable

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tapo C200 failure live view: 406 Not acceptable

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

branquinho

2022-08-02 14:30:26

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-08-02

Tapo C200 failure live view: 406 Not acceptable

2022-08-02 14:30:26

Tags: #Live View

Model: Tapo C200

Hardware Version: V1

Firmware Version: 1.1.16

Hi.

From time to time, the camera does not allow me to view in live mode through the rtsp protocol, giving the error:

live555 error: SETUP of'video/H264' failed 406 Not Acceptable

live555 error: SETUP of'audio/PCMA' failed liveMedia5

live555 error: Nothing to play for rtsp://192.168.2.200:554/stream1

satip error: Failed to setup RTSP session

This log is from VLC but I got the same from Homeassistant.

Only after a camera restart, this error go away.... until came again!

It's possible that this is a firmware bug?

2 Reply

Antharian

LV1

2022-10-27 15:27:36

Posts: 4

Helpful: 5

Solutions: 0

Stories: 0

Registered: 2022-10-27

Re:Tapo C200 failure live view: 406 Not acceptable

2022-10-27 15:27:36

@branquinho I have seen the same issue. It appears that this is due to the number of connection to the device. If I have more than 2 rtsp feeds going, I receive the 406 error.

Is anyone from TP-Link able to confirm the maximum number of RTSP connections this camera can support?

Solla-topee

2022-10-28 08:13:09 - last edited 2022-10-28 08:14:09

Posts: 13370

Helpful: 2307

Solutions: 1925

Stories: 8

Registered: 2020-05-19

Re:Tapo C200 failure live view: 406 Not acceptable

2022-10-28 08:13:09 - last edited 2022-10-28 08:14:09

@branquinho

If rtsp streaming does not work, you could also try the low quality stream like stream 2.

If the rtsp has worked fine before, you could try to reboot or factory reset on the tapo camera.

The error can have a specific meaning based on the app itself , it is suggested checking with some community of the RTSP or ONVIF apps and see if there are interpretations or suggestions.

Good day. @Antharian

Thanks for sharing the insights. Ideally, it is recommended to keep 2 video streams on the camera , including both RTSP streaming and Tapo app live-streaming.

Here is related QA in part3:

Q3.3 Can multiple accounts/devices view the Tapo camera at the same time?

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Tapo C200 failure live view: 406 Not acceptable

Tapo C200 failure live view: 406 Not acceptable

Information

Voters 0

Tags