Tapo C220's mic noises
I've use the C220 for 1 month, and found out that its mic is so bad.
It's like the noise reduction too much, makes the recording misses pretty much important sound.
The recording is attached to this thread, please increase the volume to hear the noises!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Solla-topee thanks for the firmware. I have tested it and I would like to deploy it to other cameras I have. I have sent you an email with the MACs.
Thanks for your help
- Copy Link
- Report Inappropriate Content
@enrique7 Hi, the new firmware has been pushed to your other cameras, and you can update the firmware via the Tapo app for a try.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Solla-topee thanks a lot :-)
- Copy Link
- Report Inappropriate Content
Hi,
The related changes will be implemented in the official firmware of the Tapo C220, and before that firmware is released, please send me(@Solla-topee) the MAC address of the camera via a private message if you want to try the beta firmware.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee Hello, I just send you a private message with the MAC. Thank you!
- Copy Link
- Report Inappropriate Content
@rrawes Hi, the firmware is sent to your camera, please try to update the firmware via the Tapo app.
- Copy Link
- Report Inappropriate Content
Hello,
Thanks for the firmware. The issue is now worse.
I can hear only static and nothing else.
What can I do?
Thank you.
- Copy Link
- Report Inappropriate Content
Hi,
You can try to factory reset the camera and reconfigure it, then check if it helps.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee Did not help. Any other ideas, or should I just return it?
Thank you.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 10252
Replies: 118