Official Release Deco X50/X55_V1_1.5.5 Support WireGuard VPN, Client Speed Limit and Fixed WAN Port
This Article Applied to
Deco X50/X55_V1_1.4.1
Firmware Modifications
1. Support WireGuard VPN Server/Client.
2. Support built-in easy configuration of NordVPN/Surfshark VPN.
Note: In compliance with local regulations, the Third-party VPN feature may be restricted in specific regions.
3. Add client speed limit under clients' detailed setting page.
4. Support Fixing the WAN port under Deco APP>More>Advanced>WAN Port.
5. Add Scene Priority under QOS.
6. Add Client MAC Identification to improve the accuracy of device detection.
7. Add more device icons in the Deco APP.
Download Link
| Deco X50_V1 | Deco X50_V1_1.5.5- updated 2024.8.12 |
| Deco X55_V1 | Deco X55_V1_1.5.5- updated 2024.8.12 |
Note:
1. *According to the user feedback and our further test, this 1.5.1 version does not support reverting to 1.4.1 via downgrade firmware recovery directly.
-Ever since 1.3.0, the firmware bin file has been over 32MB which passes the maximum file size of the HTTP uboot upgrade tool. So if you want to revert to 1.4.1, please refer to the following suggestions:
- Still run a firmware recovery on one of the satellites Deco X50 first.
- Try to upload an older official version, 1.2.2_Build_230301.zip for example,
- Then update to 1.4.1 from 1.2.2 via web UI.
- If this process works for the satellite Deco X50, We could repeat it on the main Deco later.
2. Please make sure the Deco APP is up-to-date.
3. Some features might not be available when there are other models in the Mesh network.
Configuration Procedure for the Newly-added Features
WireGuard VPN Server& Client
NordVPN/Surfshark VPN
-
NordVPN
-
Surfshark
Client Speed Limit
Manual Selection of the WAN Port
Set Scene Priority under QOS
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, I think maybe the video size is out of the limit and you might try to upload the video to Google Drive/One Drive or iCould if possible.
You could also try to send it via email to support.forum@tp-link.com.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP I sent it by email.It takes 21 seconds to display the network speed and 48 seconds to update the number of devices.
- Copy Link
- Report Inappropriate Content
@David-TP FYI, whenever I have a zoom call with this beta firmware. The main router briefly turns red then back to green causing the video session to pause and resume for about 5 seconds.
On the 45 min call I had yesterday the router went from red to green roughly 5 times.
Does not happen on anything else, video streaming, MS teams calls, Gaming. Only zoom sessions.
- Copy Link
- Report Inappropriate Content
@David-TP it looks like the 1.5.0 release that was available on https://www.tp-link.com/us/support/download/deco-x55/v1/#Firmware has been pulled and it has gone back to 1.4.1 as the newest version. Can you provide an update on what happened? Should we downgrade back to 1.4.1, if that is even possible?
- Copy Link
- Report Inappropriate Content
Hi, welcome to the community.
"dual authentication", do you mean 2FA/MFA on the Deco APP?
It is planned to support it on the Deco APP and it should be ready soon.
Thank you very much and the email has been received.
Will keep you updated directly via email later.
According to the user feedback here, the first 1.5.0 Build 20240311 still needs further optimization to improve the stability under certain situations.
Have you experienced any issues with the current version?
If yes, it is suggested to install the latest 1.5.0 Build 20240408 first to see whether it helped:
https://community.tp-link.com/en/home/forum/topic/657342
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Hi, Sorry for the delay.
Are you able to constantly produce this issue in a short time?
Did you make Zoom calls via the mobile phone or a laptop?
- If it is on the laptop, did the problem continue when the laptop is connected to Deco via an Ethernet cable?
- And can I have the model number of the laptop?
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
Zoom call via laptop
laptop connected via wireless.
laptop HP x360 running windows 10 22H2
Regards
mark
- Copy Link
- Report Inappropriate Content
@David-TP Is there anything new yet? I haven't received an email yet.
- Copy Link
- Report Inappropriate Content
Hi, I have forwarded your feedback to the senior engineers for further assistance.
I was wondering whether you have received my email.
If yes, please feel free to update the email with the required details.
Thank you very much for your cooperation and support.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, Sorry, I haven't received an update from the engineers yet.
But a new Deco IOS App version-3.7.39 was released yesterday and could you please try to update to this version to see whether it improves the overall Deco APP experience?
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 34681
Replies: 196
Voters 1
