Home

Forums

Stories

Knowledge Base

Smart Home Community > Tapo Smart Camera > No power despite full battery charge on my doorbell

< Tapo Smart Camera

No power despite full battery charge on my doorbell

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No power despite full battery charge on my doorbell

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Kingsknowe-EH14

2024-06-06 14:15:37 - last edited 2024-06-14 05:43:33

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-06-06

No power despite full battery charge on my doorbell

2024-06-06 14:15:37 - last edited 2024-06-14 05:43:33

Tags:

Model: Tapo D230S1

Hardware Version: V10

Firmware Version:

My Tapo device has been working fine for months. I changed the battery as I often do. I have 2 and swap them when the other needs charged.

I couldnt get any power to the doorbell at all. I have uninstalled, reset and all troubleshooting options but I just cant get the power back to the doorbell. Without the LED I can't pair it

Any other ideas of how to get the power back?

Thank you

1 Accepted Solution

Solla-topee

2024-06-07 06:27:41 - last edited 2024-06-14 05:43:33

Posts: 13654

Helpful: 2360

Solutions: 2035

Stories: 8

Registered: 2020-05-19

Re:No power despite full battery charge on my doorbell-Solution

2024-06-07 06:27:41 - last edited 2024-06-14 05:43:33

@Kingsknowe-EH14

Hi,
Below is the instruction to charge the battery and insert it into the camera, when you power on the doorbell camera, please ensure the battery is fully charged and the hardware connection is no problem between the camera and the battery.
Tapo Battery Pack (Tapo A100) Unboxing and Charging
Since you have two batteries, you can also swap the battery for a try.

On the doorbell camera, try to press the reset button for 10 seconds to factory reset it when a battery is inserted, if the status LED is not on, you can contact your retailer or local support to check if the camera is under warranty.

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Recommended Solution

Kingsknowe-EH14

LV1

2024-06-07 08:17:22

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-06-06

Re:No power despite full battery charge on my doorbell

2024-06-07 08:17:22

@Solla-topee Thanks for taking the time to reply. You are a great help. I managed to get a call with one of the support team and it's been confirmed that the unit has developed a fault. It's going through the warranty process now. I've been really happy with the product and look forward to receiving my replacement.

Solla-topee wrote

@Kingsknowe-EH14

Hi,
Below is the instruction to charge the battery and insert it into the camera, when you power on the doorbell camera, please ensure the battery is fully charged and the hardware connection is no problem between the camera and the battery.
Tapo Battery Pack (Tapo A100) Unboxing and Charging
Since you have two batteries, you can also swap the battery for a try.

On the doorbell camera, try to press the reset button for 10 seconds to factory reset it when a battery is inserted, if the status LED is not on, you can contact your retailer or local support to check if the camera is under warranty.

Best Regards