0
Votes

C500 Smart Actions

 
0
Votes

C500 Smart Actions

C500 Smart Actions
C500 Smart Actions
2024-10-29 16:06:34 - last edited 2024-11-14 11:00:29
Model: Tapo C500  
Hardware Version: V1
Firmware Version: 1.3.1

Hi there,

 

I have both C200 and C500 for indoor and outdoor scans. However, the C500 does not have a smart action feature to set the pan & tilt position to a specifi default position, as in the C200.

 

I believe this is a critical feature after detecting a motion and then return to the desired position. 
 

Thanks, and I hope this features comes out quite soon!

Abdel

#1
Options
1 Accepted Solution
Re:C500 Smart Actions-Solution
2024-10-30 09:00:26 - last edited 2024-11-14 11:00:29

  @SecureHome 

Hi,
Typically, the position where you enable the tracking feature is the default position, and the camera will return to it after tracking the events. If you want to the camera return to a position after tracking, you can enable the tracking feature in that position.
Best Regards

Recommended Solution
#2
Options
1 Reply
Re:C500 Smart Actions-Solution
2024-10-30 09:00:26 - last edited 2024-11-14 11:00:29

  @SecureHome 

Hi,
Typically, the position where you enable the tracking feature is the default position, and the camera will return to it after tracking the events. If you want to the camera return to a position after tracking, you can enable the tracking feature in that position.
Best Regards

Recommended Solution
#2
Options