tapo tc70
Does the TC70 have a schedule to turn on and off, I cant see it on my Tapo app. thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
The camera does not have a power on/off scheduling option, however, using the Smart Action feature, you can arrange the camera to enter or exit privacy mode at a specific time. The camera's live feed and recording will stop when the privacy mode is enabled. To achieve this, you can create Automation rules for the camera.
How to create Smart Action (Automation or Shortcut) on the Tapo app
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
The camera does not have a power on/off scheduling option, however, using the Smart Action feature, you can arrange the camera to enter or exit privacy mode at a specific time. The camera's live feed and recording will stop when the privacy mode is enabled. To achieve this, you can create Automation rules for the camera.
How to create Smart Action (Automation or Shortcut) on the Tapo app
Best Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
If you can't turn on/off the camera's privacy mode via the Smart Action > Automation feature, please confirm the following information.
1. Please describe the usage scenario you want to achieve.
2. Send us the pictures of your Automation entries that achieve your usage scenario.
3. Please send us the execution history picture of your Automation entries.
Best Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
OFFLINE on red light mode
- Copy Link
- Report Inappropriate Content
Hi,
You can refer to the instructions below to troubleshoot if your camera keeps going offline.
What should I do if my Tapo smart device keeps losing connection or going Offline?
If the problem persists, it's recommended to start a new thread here to post your detailed usage scenario and questions for further assistance.
Best Regards
- Copy Link
- Report Inappropriate Content
@Mac2481 my device is not working... I have connected to my working wifi with strong signal still red light is showing in the tapo device camera... How should I get the solution and get connected to my tapo camera
- Copy Link
- Report Inappropriate Content
Hi,
1. Is your camera's model number TC70? What's the camera's hardware version?
2. What's the model number of your router? Do you have an internet connection when connecting to your router's Wi-Fi?
3. If your router is working, you can try to press and hold the reset button on the camera for 10 seconds to perform a factory reset, ensure the camera is removed from the Tapo app, then reconfigure it and check if it will work fine.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1256
Replies: 8
Voters 0
No one has voted for it yet.