When i try to pan/tilt camera it always says that camera is currently busy please wait.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

When i try to pan/tilt camera it always says that camera is currently busy please wait.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
When i try to pan/tilt camera it always says that camera is currently busy please wait.
When i try to pan/tilt camera it always says that camera is currently busy please wait.
2025-04-03 23:51:00 - last edited 2025-04-16 12:01:15
Model: Tapo C210  
Hardware Version:
Firmware Version:

When i try to pan/tilt camera it always says that camera is currently busy please wait. I need solution.

  0      
  0      
#1
Options
1 Accepted Solution
Re:When i try to pan/tilt camera it always says that camera is currently busy please wait.-Solution
2025-04-07 11:59:46 - last edited 2025-04-16 12:01:15

  @Dastgir_Mushrif 

Hi,
You can check if the following tips are helpful.
  1. Please ensure the Tapo app and the camera's firmware are up to date.


  2. You can turn off the camera, turn it back on, and check if it helps.


  3. Try a different phone if you have one.


  4. Go to the Tapo app > camera's Device Settings > Pan & Tilt page, tap Pan & Tilt Correction, and check if the camera will Pan & Tilt. If so, try to Pan/Tilt the camera manually after Pan & Tilt Correction and check if it helps.


Best Regards

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:When i try to pan/tilt camera it always says that camera is currently busy please wait.-Solution
2025-04-07 11:59:46 - last edited 2025-04-16 12:01:15

  @Dastgir_Mushrif 

Hi,
You can check if the following tips are helpful.
  1. Please ensure the Tapo app and the camera's firmware are up to date.


  2. You can turn off the camera, turn it back on, and check if it helps.


  3. Try a different phone if you have one.


  4. Go to the Tapo app > camera's Device Settings > Pan & Tilt page, tap Pan & Tilt Correction, and check if the camera will Pan & Tilt. If so, try to Pan/Tilt the camera manually after Pan & Tilt Correction and check if it helps.


Best Regards

Recommended Solution
  0  
  0  
#2
Options