Smart Home Community > Tapo Smart Camera > No reconoce tarjeta SD tras reinicio
< Tapo Smart Camera

No reconoce tarjeta SD tras reinicio

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No reconoce tarjeta SD tras reinicio

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No reconoce tarjeta SD tras reinicio
No reconoce tarjeta SD tras reinicio
2025-05-29 08:19:46 - last edited 2025-06-10 05:46:04
Tags: #MicroSD card
Model: Tapo C200  
Hardware Version: V5
Firmware Version: 1.2.2

Hola.

Tengo un problema con la cámara y la tarjeta SD.

Cuando inserto la tarjeta la reconoce bien, la puedo formarear sin problema y todo correcto. Pero en el caso que haya un corte de corriente o reinicie la cámara, ya no detecta que tiene una tarjeta dentro por lo que tengo que sacar y meter la tarjeta manualmente de nuevo para que la detecte.

 

Es un problema porque si no estoy en casa y se va la corriente, ya no puedo grabar.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:No reconoce tarjeta SD tras reinicio-Solution
2025-05-30 03:57:40 - last edited 2025-06-10 05:46:04

  @BokeRocky 

Hi,
Please confirm the following information for the reported issue.
  1. What's the model number and capacity of the microSD card?

 

  2. If you have a different SD card, please test if the same issue occurs after inserting it into the camera.
 
  3. Do you have the reported issue when you reboot the camera via the Tapo app?

 

  4. Please refer to the following instructions to collect the camera log after reproducing the issue for further analysis.
      How to get the log of Tapo Camera 


Best Regards

>> Smart Home: Introduction to Common Smart Action Scenarios for Tapo Cameras >> Tapo Camera Day/Night Mode Selection Guide: Best Settings Recommendations for Different Scenarios >> What should I do if my Tapo camera triggers false detection? >> Enhance Your Tapo App Experience: Introduction to Several Practical Features
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:No reconoce tarjeta SD tras reinicio-Solution
2025-05-30 03:57:40 - last edited 2025-06-10 05:46:04

  @BokeRocky 

Hi,
Please confirm the following information for the reported issue.
  1. What's the model number and capacity of the microSD card?

 

  2. If you have a different SD card, please test if the same issue occurs after inserting it into the camera.
 
  3. Do you have the reported issue when you reboot the camera via the Tapo app?

 

  4. Please refer to the following instructions to collect the camera log after reproducing the issue for further analysis.
      How to get the log of Tapo Camera 


Best Regards

>> Smart Home: Introduction to Common Smart Action Scenarios for Tapo Cameras >> Tapo Camera Day/Night Mode Selection Guide: Best Settings Recommendations for Different Scenarios >> What should I do if my Tapo camera triggers false detection? >> Enhance Your Tapo App Experience: Introduction to Several Practical Features
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 158

Replies: 1

Tags

MicroSD card
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.