REFRESH BUTTON/TIMER
HERE is the thing for some reason my camera after a few hours stop working and i have to refresh it to be active again ,so my question is this is there any choice to be refresh auto and have to do it by my self or is there any other software to add and do that for me is frustrating that i have to refresh the camera every 8-9 hours.Can the software developers add a future to software about choosing when to do refresh automatically or even with timer???
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Please confirm the following information for the reported phenomenon.
1. Do you mean you need to reboot the camera after it stops working to activate it again? If not, please describe what you mean by the "refresh" operation.
2. What's the LED status on the camera when it stops working, such as flashing red, solid red, etc.?
3. On the camera's Device Settings > Device Info page, please tap the Wi-Fi icon and check the RSSI value.
4. On the camera's Device Settings > Reboot Camera page, you can enable the Auto Reboot feature and check if it helps.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee thats the problem on device settings there is not any auto refresh button and there is a new one problem that i found on TAPO C200 i klik on RECORD button for recording IT START RECORD but when i close the software it stop recording on sd card
- Copy Link
- Report Inappropriate Content
Hi,
1. Regarding the "refresh" phenomenon or the feature request to add the "auto refresh" button, please help confirm the information in this post so I can better assist you.
2. The Manual Record won't take effect after you leave the camera's live view page. If you want to record video continuously or record detection video clips on an SD card, please refer to the instructions below to configure your camera's storage settings.
How can I store the Tapo camera video recordings on a microSD card
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 62
Replies: 3
Voters 0
No one has voted for it yet.