23
Votes

PTZ - (Pan & Tilt) Feature [C200 C210 C500 C510]

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12
 
23
Votes

PTZ - (Pan & Tilt) Feature [C200 C210 C500 C510]

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
PTZ - (Pan & Tilt) Feature [C200 C210 C500 C510]
PTZ - (Pan & Tilt) Feature [C200 C210 C500 C510]
2022-04-11 11:27:33 - last edited 2024-08-13 06:17:39
Model: Tapo C200   Tapo C210   Tapo C500  
Hardware Version:
Firmware Version:

Request for the following PTZ (Pan&Tilt) Features:

 

1. Cruise/Patrol to Marked Positions

2. Limiter/Defined Mark for Panning Vertically and Horizontally

 

This will make the PTZ more efficient to use.

 

- Better if time intervals can be configured

- Random Positions to visit is also good

#1
Options
1 Accepted Solution
Re:PTZ - (Pan & Tilt) Feature [C200 C210 C500 C510]-Solution
2024-02-01 07:56:10 - last edited 2024-08-13 06:17:39

Hi All,
1. Currently, some Tapo camera models, such as Tapo C225, C500, etc., support configuring the Patrol Mode on the camera's Device Settings>Pan & Tilt>Patrol Mode page. Below are the steps to set up the Patrol Mode feature.

Note: Non-stop patrolling may affect the motor life of your camera.


1) Tap Add Mark on the Patrol mode page, tap the arrow on the steering wheel to select a desired viewpoint, and click on Add Mark.

 


2) Customize the Mark Name, select Layover Time, and tap Save to save the settings.


3) Repeat Steps 1) and 2) to add two or more marks, enable Patrol Mode, tap Patrol Mode Schedule to set a schedule to turn on the Patrol Mode, and then the camera will move between your marked positions.

 

2. For the feature to limit the maximum movement position of the camera in the vertical and horizontal directions, it's recommended to vote or leave your comments on the thread "Limit movement".

Best Regards

Recommended Solution
#18
Options
20 Reply
Re:PTZ feature options
2023-01-03 01:31:38

Hello   @vanQ 

Thank you for sharing the feature request, if any user love this feature, please leave your comments below and vote for it, 

#2
Options
RE:PTZ feature options
2023-01-05 08:09:15
Need feature
#3
Options
Re:PTZ feature options
2023-01-09 06:57:23

  @vanQ Need this too

#4
Options
RE:PTZ feature options
2023-01-09 06:58:25
this would very useful for customer
#5
Options
RE:PTZ feature options
2023-02-23 14:56:15
It's a great suggestion and this feature would make the C210 an even beter product
#6
Options
RE:PTZ feature options
2023-05-07 21:28:46
We need Cruse/Patrol to Mark Positions
#7
Options
Re:PTZ feature options
2023-06-24 13:17:04

  @Solla-topee @vanQ Hello. I definitely need this function. I don't want to pan my camera to my neighbor's door. It's really annoying. That's why I can't use motion tracking fuction at all.

#8
Options
RE:PTZ feature options
2023-06-24 13:18:15
When I using motion tracking I want to set limits for pan and tilt.
#9
Options
Re:PTZ feature options
2023-07-10 06:59:43 - last edited 2023-07-10 07:00:06

  I would like this for the C500. without this, the Cruise/Patrol feature is of very limited use.

#10
Options
RE:PTZ feature options
2023-07-22 12:05:37
I agree
#11
Options

Information

Helpful: 23

Views: 2449

Replies: 20

Voters 22

voter's avatar
voter's avatar
voter's avatar
voter's avatar
+ 18 Voters