Connecting to AP

Connecting to AP

Connecting to AP
Connecting to AP
2024-09-02 19:36:32 - last edited 2024-09-06 08:23:03
Model: NC450  
Hardware Version: V2
Firmware Version:

Hello. My home config is to turn off the wireless in the router and use a Ruckus AP instead. Consequently I cannot connect the camera to the AP.

If I turn on the router wireless I can use 2.4 to connect, but I would rather connect to the Ruckus AP. I can see an image in the phone app and in the cloud.

I can't find a way of doing this and wonder if it is possible please?

Also - even though I know the camera ip, typing it into a browser always gives me a security warning. I've turned various security settings off, tin various browsers, to no avail.

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Connecting to AP-Solution
2024-09-03 08:49:06 - last edited 2024-09-06 08:23:13

  @Choc 

Hi,
From your description, it seems your NC450 is connected to your router's Wi-Fi thus it won't connect to the AP's Wi-Fi. You can try to press the reset button on the camera for 10 seconds to factory reset it and then reconfigure it to connect to the new Wi-Fi network.
How to set up a cloud camera with tpCamera APP?
 

Alternatively, you can refer to the attached instructions to try to log in to the camera's web UI and then go to the Basic > Wireless Connection page to connect the camera to the new Wi-Fi network.
(Note: the login username and password may not be admin/admin if you have changed them before.)

 

Best Regards

File:
NC450 – Change username & password through Web UI (Windows OS).pdfDownload
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Connecting to AP-Solution
2024-09-03 08:49:06 - last edited 2024-09-06 08:23:13

  @Choc 

Hi,
From your description, it seems your NC450 is connected to your router's Wi-Fi thus it won't connect to the AP's Wi-Fi. You can try to press the reset button on the camera for 10 seconds to factory reset it and then reconfigure it to connect to the new Wi-Fi network.
How to set up a cloud camera with tpCamera APP?
 

Alternatively, you can refer to the attached instructions to try to log in to the camera's web UI and then go to the Basic > Wireless Connection page to connect the camera to the new Wi-Fi network.
(Note: the login username and password may not be admin/admin if you have changed them before.)

 

Best Regards

File:
NC450 – Change username & password through Web UI (Windows OS).pdfDownload
Recommended Solution
  0  
  0  
#2
Options
Re:Connecting to AP
2024-09-05 22:34:03 - last edited 2024-09-06 19:49:14
I did a reset. I also downloaded a very early version of FFox. This combination did the trick. Thanks
  0  
  0  
#3
Options
Re:Connecting to AP
2024-09-06 08:22:58

  @Choc 

Hi, 
Glad to hear the case is solved, and thank you for the case sharing.
Best Regards

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 256

Replies: 3

Related Articles