@z3n0 Yes, you can assign a VLAN ID per SSID and the EAP will tag packets accordingly. Please make sure your upstream switch/router are properly configured if not Omada controlled, and if they are...

@ArtVandelay As stated above, I currently use a client-site L2TP/IPsec to default route a single VLAN (wired and SSID) via tunnel to a remote site. Other VLANs stay local. You can even pass DNS...

@shano81 How would you feel about rolling back to 2.1.1 (force manual upgrade) for a bit to see if problem persists? https://www.tp-link.com/en/support/download/er605/#Firmware

@shano81 Are you by chance running an ER605? If so, what hardware and firmware versions are you running on. There have been a number of recent posts regarding DHCP issues with this router.

Yes, PVID selects which VLAN ID inbound and untagged traffic is assigned within the device. Any untagged traffic from an AP would automatically get assigned to the default VLAN as a result. In order...

@flips01 TPlink router ports are not switch ports. Each LAN port always has default LAN untagged, and you can optionally add other VLANs as tagged interfaces. You can see this for yourself in the...