@Yttra AFAIK, it's pretty basic in TPlink land....there is simply a 1:1 mapping between SSID and optional VLAN, not between user and VLAN. So the config is limited to SSID + Optional VLAN tagging in...

Can you paste a screen grab from your controller showing the Topology with labels turned on? My guess is your switch setup is somehow blocking access to the controller.

@StormMountain I assume you only run 240V (120+120) on your poles...so you could tap that for POE power at the poles and make that a wired backbone fed from the main lodge leveraging some outdoor...

@StormMountain in reverse... The EAP225's come with their own 24V Passive POE injector in the box. If you use the 600 series outdoor units (not worth it IMHO given your uplink capacity) you'd need to...

ok, what does a screengrab of one of your forward rules look like?

@EagleHeart Mount them flat to the wall and higher up than not. The data sheet below refers to an 'included ceiling/wall mount' which I see as license to mount in either orientation....