@htevents Yes you have config correct. The PVID is a way of telling a port which VLAN it is native to. You need to change both Port 2's to have their PVID be 20 (this causes the switch to tag all...

@shberge Were you using a Controller to do this test, and did you mock up the SSID-per-router bit on a controlled AP as well?

@ken22 I just realized I'd drawn a diagram of what you'd already done. If you were still having the issue with the A6 LAN-LAN connected to the ER605, then the issue is 99% in the ER605 config. Are...

@htevents Tinjo, welcome. With VLAN'S it is best to think of every port on the switch as either a Trunk or Access port. A trunk port expects tagged traffic only. An access port is configured with its...

@giopas In TPlink land mesh means wireless backhaul between APs to get back to switch. However, no wall AP supports this feature. That said, you really shouldn't be having the experience you are....

@kumarullal The Lan-Lan ACL is the required feature. Previously it did not exist and you could only do WAN-LAN. My routers still do not have LAN-LAN so I cannot help you further with config, but it...