@Vincent-TP I'm using the WPA2 with AES. Max Support speed was 800 Mbps but the speed between the AP & Client is max 250 Mpbs.

Hello Guys, I have two CPE 710 devices configured as an access point and client. The issue is that I cannot see the wireless signal quality on the AP device but can on the client device.

@Hank21 After replacing the Cables, CPE 710 (Access Point) issue was resolved and now interface speed was 1000Mbps. But on CPE 710 (Client) Interface speed only 100 Mbps. Now I have a two issues....

@Hank21 I tried the above process but no luck. So, I working new method. Distance between CPE 710 to Switch is 96 Meters Step:- 1 Replacing the all cables from CAT6 to CAT 7a Step:- 2 CPE 710 to POE...

@Hank21 Port (interface) speed was remain same if connected directly to laptop. As well Hard reset the CP 710. But no luck. AP to POE was 51 Meters & POE to Switch 45 Meters.

Hello Guys, I brought a CPE 710, and Product was Fine. But Port speed was 10 Mbps. Based on Specfications. It has a 1 Gig Interface. AP to POE distance was 94 meters.